FS: VR4/GSR/EVO1-3 PARTS + OTHER RANDOMS

[SIKWPN]

1x 4G64 7 bolt narrow engine block with crank and sump, can use vr4/evo1-3 head on for 2.4lt stroker $300

1 x 4G63 7 BOLT BLOCK WITH CRANK ( HAS SURFACE RUST SUIT REBUILD ) $90

1 X GEN EVO1 REAR WING (NEEDS RESPRAY/REPAIR AND HAS A CHUCK MISSING ABOUT 10CENT PIECE ) $100

1 X SET FRONT JAP SPEC GSR RECARO WITH RAILS (HAS BACK SEAT ASWELL BUT NOT IN GOOD NICK WILL THROW IN WITH THE SALE) $300

1 x 4G63 STOCK FUEL RAIL WITH REG $20

1 X STOCK EVO 3 FUEL PUMP (USE) $30

1 X VR4 STOCK COIL PACK (MISSING 1 COIL PACK) $20

1 X GSR STOCK COIL PACK $50

1 X EVO1-3 STOCK COIL PACK $50

1 X EVO 1-3 CRANK ANGLE SENSOR $60

1 X EVO 1-3 4G63 ENGINE LOOM $150

1 X EVO 3 INLET MANIFOLD WITH EGR $150

1 X COMPLETE EVO 2 MOTOR MINUS TURBO+CLUTCH CAN SEE/HEAR RUNNING ON CAR 1.5Kono CAN SELL IT CHEAPER WITHOUT HEAD

1 X TOP SECRET STEERING WHEEL WITH QUICK RELEASE HUB $300

1 x APEX'i BOV $40

4 x RC 1000cc INJECTORS ( NEW ) direct fit to stock rails and plugs $280

1 X BOSCH 044 EXTERNAL FUEL PUMP (NEW) $200

1 X EVO 1-3 STD OVAL INTAKE PIPE FROM AFM TO TURBO $50

1 X PEDDERS FRONT SWAY BAR TO SUIT GSR/EVO1 (I THINK ITS 24MM THICK)(never use) $50

1 X VR4 CRANK ANGLE SENSOR $60

1 X EVO 1-3 BRAKE MASTER 13/16 $40

1 X EVO 1-3 BRAKE BOOSTER $40

1 X 4G63 7 BOLT OIL FILTER HOUSING $30

1 X POWER STEERING PUMP( CAME OF AN EVO 3 MOTOR ) $30

1 X STEERING RACK ( CANT REMEMBER IF ITS OFF AN GSR OR AN EVO 1-3) $30

3 X ARIAS FORGED PISTON 20tho OVERSIZE SUIT 4G63 7 BOLT ( PART NUMBER 352102) (USE) $100

4 X AUTO METER GAUGES ( BOOST, OIL PRESSURE, WATER TEMP AND 5" MONSTER TECHO WITH SHIFT LIGHTS ) USE $450

2 X NOS 10lb BOTTLE WITH BRACKETS + 1 NEW POWER KIT WITH JETS ( HAVE TRY FITTED THE BOTTLE TO CAR BUT NEVER USED SO STILL NEW ) $700

1 x CUSCO 6 POINT BOLT IN ROLL CAGE TO SUIT CC/GSR/EVO1-3 COME WITH NUTS / BOLTS AND PLATES $650

1 X EVO 3 ALLOY UNDER TRAY $150

1 X EVO9 FRONT RIGHT LOWER CONTROL ARM AND HUB

1 X SET REAR F/GLASS POD $30

1 X VR4 FRONT HALF INNNER DRIVE SHAFT $100

1 X EVO 1-3 FRONT HALF INNER DRIVE SHAFT $100

1 x SET TIEN COIL OVERS TO SUIT GSR/EVO1-3, NEARLY NEW 1.5K

4 X 15" Evo 3 Oz RACING WHEELS ( GOOOD NICK RESPRAYED/POWEDER COATED WHITE WITH 2 GOOD 80% TYRES ) $400

4 x 17x7 8 SPOKES UNI 4 STUD ALLOY IN BLACK WITH 205/40/17 80% TYRES, 2 HAS GUTTER RUSH $550

4 X 17X7 AVS 6 GOLD 4X114.3 STUD $600

4 X 17X8 +38 5X114.3 EVO 8 ENKEI IN BLACK $500

1 x SET REAR RACE FAB BREMBO BRACKET TO SUIT GSR/EVO1-3 ( NEW ) $350

1 x STOCK EVO 1-3 FRONT MOUNT INTERCOOLER WITH PIPING

1 x complete import gsr in black with evo2 motor and evo1 drive line, evo bonnet guards, climate control, rear wiper, rear antenna etc as in pic, never been boosted, was use as an daily,no longer needed, no rego 4.9k ono (front bar sold) can supply with RWC at an extra cost...

Location: Melboune, Bayswater

Contact: Pm

 

[MDK87]

Do you know exactly what else I'd need to fit this into my Galant VR4?
Does it bolt upto the VR4 engine mounts, gearbox, sump?
Can I bolt the stock VR4 ancillaries onto it? AC pump/bracket, alternator, PS pump/bracket.
Has is been bored previously?

I tried looking for that 'Stroke or not' .pdf document to find a bit more solid info about it but I couldn't find it.

Cheers.

 

[GVR40]

Do you know exactly what else I'd need to fit this into my Galant VR4?
Does it bolt upto the VR4 engine mounts, gearbox, sump?
Can I bolt the stock VR4 ancillaries onto it? AC pump/bracket, alternator, PS pump/bracket.
Has is been bored previously?

I tried looking for that 'Stroke or not' .pdf document to find a bit more solid info about it but I couldn't find it.

Cheers.

mo
front and rear roll stoppers are in a different spot on the gearbox rather than on the block
vr4 ancillaries should all bolt to it without an issue

talk to troy he has stroke - in his opinion the best option is 2.2l stroker using a 94mm crank. needs some machining work on the 4g63 block for it to fit thought

 

[4piknup]

Moter is missing the roll stop mounts for a vr4 application. And the crank wont go into a 6 bolt either.

 

[ENGINR]

I guess the other question to ask is whether it's CC lancer compatible.

 

[4piknup]

Its 6mm taller. So some say that it needs a evo bonnet. (I will probably lower the engine and box 6mm) we know the 2.0 hits the gsr bonnet, so +6mm is going to hit as well. I dont know how much room a 2.0 has with a evo bonnet.

It probably needs the oil drains in the head face blocked with core plugs.
Other than that, it should be fine.

Im sure it will have a knock sensor bung?

 

[Miniman_alis]

What car did the 7 bolt 4g64 actually come out of?

 

[ENGINR]

But it will bolt to an evo gearbox?

 

[ENGINR]

But it will bolt to an evo gearbox?

 

[SIKWPN]

its out of an nimbus and yes it will bolt up to vr4,gsr and evo 1-3 boxes,

i will throw in the 64 sump, pick up, even brackets for the power steering pumps for those who needs it..

 

[JET-65R]

What area are you from

 

[evo-gsr]

Melbourne according to his profile.

 

[MDK87]

Damn!

 

[SIKWPN]

I'm from Melbourne, if I knew some 1 from shitney wanted I would took it with me but to late now as I'm here already.. =)

 

[JET-65R]

Lol all good mate thanks

 

[EvoIIIGSR]

Oi I'll take wheels cunt

 

[evo-gsr]

14" ?
Dont you mean 15" ?

 

[4piknup]

See the 3 oil drain holes on the exhaust side of the head face? They need to be blocked off with core plugs or similar, as the early heads dont cover them up. No biggie as they are only oil drains and there is no more than crankcase pressure on them.

 

[SIKWPN]

bump

 

[evo-gsr]

Pics of this ?


1 X TOP SECRET STEERING WHEEL WITH QUICK RELEASE HUB $300