Entaran
Well-Known Member
Please call or SMS me regarding these parts, I don't frequent the forums
very often. I will try to keep track of who dibs me first in cases where two or more people want the same bits.
All parts unless otherwise stated are in as new (done less than 20 kms) condition.
Good stuff:
* FFWD Fuel System, including fuel reg, anodised fittings, braided line from tank forward, filter & connections (can include fuel tank if you need it).
$400 - Sold
* FIC 650cc injectors, as tuned on matress's car with great result (he's running 750's).
$250 - Sold
See http://www.ffwdconnection.com/gogojuice.shtml for the above.
* Fidanza Lightened flywheel & Matching Fidanza 4.3 clutch/pplate/etc
Will not seperate, purchase as a complete unit, this is an amazing clutch setup with very little noise and a sharp engagement.
$650, flywheel was bought locally for nearly 500, prices appear to have dived since then! - Sold
Clutch: http://www.extremepsi.com/store/customer/product.php?productid=19715&cat=1445&page=1
* Gearbox & matching transfer, freshly rebuilt as new. Rebuilt to w5m33 box specs, although the numbers on the boxes won't match up as we tore down 3 boxes and used a lot of new parts and the best of the casings to make up the combination. Shifts PERFECTLY, NO NOISE, Gearsets are properly worn in. This stuff was built to handle a decent whack of HP, it is 3.545 ratio and does NOT have a locked transfer or lsd front. Comes with shifter cables to suit, so jspec guys need not worry. PICKUP ONLY.
$1350 - Sold
* 4g63 engine, includes block, head, sump etc, everything except turbo itself. I might be able to dredge up a stock fuel rail and injectors to throw in if required. This engine was running last time we put a headgasket in it (3 weeks ago now) and is now sitting on an engine stand in my shed. Does not include loom or ecu, no I don't have spares, don't ask. Has ARP studs and forged rods, stock pistons. brand unknown. + Cometic headgasket + unknown cams, not stock. (sounds like 272's, but might be 264/272, or a custom grind). PICKUP ONLY.
$1200 - Sold
* VR4 RS vented bonnet, genuine. Porsche Black Mica paintjob (still in perfect condition), never been on car more than a day since paintjob. PICKUP ONLY.
$700
* Rolling VR4 shell, no engine, gearbox/transfer. Has reco rear diff, Jspec bars front & rear (facelift), std grille, white, rustfree last I checked, no bents, dints or remaining accident damage. ASPEC, no compliance needed, have all paperwork so you can make a running, registrable car or turn into a rally shell. Has full interior & all bits and pieces. Includes 15 inch alloy rims with as new tyres.
$2000, will deliver to melb for another $250 (Diesel is crazy expensive)
* 4g63 Head/engine bits & pieces ALL BRAND NEW UNOPENED
- FFWD Bee-mad springs & retainers w/seals - $450 set of 16
- FFWD Copper gasket set (ALL gaskets) incl SCE ICS titan headgasket w/orings suit big or small bore upto 040 over, $250 the lot
- FFWD Bolts & fasteners, ARP studs bolts crank thingy, etc - $150 the lot
- FFWD Balance shaft elim kit - $50 - EGR blockoff sold. - Sold
* Turbo back 3 inch exhaust
$ - Sold
Other random stuff available: Please ask.
Contact Details:
Lawrence
0407 569 651
PM/reply here will be read, but not quickly. I'd prefer call/sms.
I'll post anything not marked pickup only. I can organise delivery of the shell for the price marked to anywhere in Melb. If you have a mate who might want these parts, feel free to give them my details if they aren't on the forum (or even if they are)
very often. I will try to keep track of who dibs me first in cases where two or more people want the same bits.
All parts unless otherwise stated are in as new (done less than 20 kms) condition.
Good stuff:
* FFWD Fuel System, including fuel reg, anodised fittings, braided line from tank forward, filter & connections (can include fuel tank if you need it).
$400 - Sold
* FIC 650cc injectors, as tuned on matress's car with great result (he's running 750's).
$250 - Sold
See http://www.ffwdconnection.com/gogojuice.shtml for the above.
* Fidanza Lightened flywheel & Matching Fidanza 4.3 clutch/pplate/etc
Will not seperate, purchase as a complete unit, this is an amazing clutch setup with very little noise and a sharp engagement.
$650, flywheel was bought locally for nearly 500, prices appear to have dived since then! - Sold
Clutch: http://www.extremepsi.com/store/customer/product.php?productid=19715&cat=1445&page=1
* Gearbox & matching transfer, freshly rebuilt as new. Rebuilt to w5m33 box specs, although the numbers on the boxes won't match up as we tore down 3 boxes and used a lot of new parts and the best of the casings to make up the combination. Shifts PERFECTLY, NO NOISE, Gearsets are properly worn in. This stuff was built to handle a decent whack of HP, it is 3.545 ratio and does NOT have a locked transfer or lsd front. Comes with shifter cables to suit, so jspec guys need not worry. PICKUP ONLY.
$1350 - Sold
* 4g63 engine, includes block, head, sump etc, everything except turbo itself. I might be able to dredge up a stock fuel rail and injectors to throw in if required. This engine was running last time we put a headgasket in it (3 weeks ago now) and is now sitting on an engine stand in my shed. Does not include loom or ecu, no I don't have spares, don't ask. Has ARP studs and forged rods, stock pistons. brand unknown. + Cometic headgasket + unknown cams, not stock. (sounds like 272's, but might be 264/272, or a custom grind). PICKUP ONLY.
$1200 - Sold
* VR4 RS vented bonnet, genuine. Porsche Black Mica paintjob (still in perfect condition), never been on car more than a day since paintjob. PICKUP ONLY.
$700
* Rolling VR4 shell, no engine, gearbox/transfer. Has reco rear diff, Jspec bars front & rear (facelift), std grille, white, rustfree last I checked, no bents, dints or remaining accident damage. ASPEC, no compliance needed, have all paperwork so you can make a running, registrable car or turn into a rally shell. Has full interior & all bits and pieces. Includes 15 inch alloy rims with as new tyres.
$2000, will deliver to melb for another $250 (Diesel is crazy expensive)
* 4g63 Head/engine bits & pieces ALL BRAND NEW UNOPENED
- FFWD Bee-mad springs & retainers w/seals - $450 set of 16
- FFWD Copper gasket set (ALL gaskets) incl SCE ICS titan headgasket w/orings suit big or small bore upto 040 over, $250 the lot
- FFWD Bolts & fasteners, ARP studs bolts crank thingy, etc - $150 the lot
- FFWD Balance shaft elim kit - $50 - EGR blockoff sold. - Sold
* Turbo back 3 inch exhaust
$ - Sold
Other random stuff available: Please ask.
Contact Details:
Lawrence
0407 569 651
PM/reply here will be read, but not quickly. I'd prefer call/sms.
I'll post anything not marked pickup only. I can organise delivery of the shell for the price marked to anywhere in Melb. If you have a mate who might want these parts, feel free to give them my details if they aren't on the forum (or even if they are)
