Gearbox/Transfer case kit for RVR

[rhodieee]

Anyone know where i can get a bearing and seal kit for gearbox for a 95 RVR Sportsgear? Hopefully australia based? I dont want to wait too long for parts over seas. Thanks!!!

 

[MrConsistent]

Which seals/bearings? and auto or manual?

 

[rhodieee]

Which seals/bearings? and auto or manual?

my mistake for not putting it in! Manual! Cheers!

 

[MrConsistent]

Mainly know about auto's but as far as i know the bearing for the output shaft of the box (if that's what you are after) is accessed from the inside meaning a box out and apart job....
And the seal is easy just take off the transfer case and will be right there.
Or totally different if you want the shaft seals....

 

[4piknup]

The only seals you can do with the box in, are the axle seals. Oh maybe you can get the transfer seal if you are very nimble.

At a minimum you will need the input and inter shaft bearings. Any others, you will need to inspect/diagnose issues and order parts after. Expect that the smaller bearings will not be available locally anyway.

 

[MrConsistent]

http://www.meek.com.au/evo-1-3/drivetrain/gearbox-bearing-seal-set-evo1-3.html

They can get all the bit separately too

 

[4piknup]

Its a pretty good kit and a good price too.
looks like it has input, inter, output, and diff bearings and a few others and the 4 seals.
pretty sure it was about $400 in perth for just the 4 bearings and seals.