Genuine Evo 1 2.3L

[Michael]

The time has come for me to sell my pride and joy.

*2.3 litre eagle stroker
*Manley rods
*Eagle crank
*JE forged pistons
*ARP head stud kit
*MLS cosmetic head gasket
*Decomp head
*HKS 264/264 cams
*FIC 1050cc injectors
*Walbro 400 fuel pump
*Garrett GT35R
*Tial 38mm external wastegate (plumbed back)
*Turbosmart plumback BOV
*Turbosmart boost controller
*3inch turbo back exhaust
*Magnaflow muffler
*Aftermarket alloy radiator
*New F1 racing stage 4 clutch
*Evo 3 gearbox with new 3rd-4th double synchro rings
*Meek brass shifter bushes
*short shifter
*Evo 6 ecu
*Tuned on E-flex ethanol fuel
*Full genuine Evo 3 bodykit
*roof skin replaced by previous owner
*Resprayed in Pyrenees black less than a year ago
*17inch buddy club P1s
*Tein super street coil overs all around
*new ralliart bushes in rear
*new front a rear engine mounts
*timing belt, harmonic balancer and water pump just replaced

Has a couple of scrapes on the front lip aside from that the rest of the body is immaculate for the age of the car. Interior is all genuine, Recaro seats are in amazing condition no tears or deformation, momo steering wheel has virtually no wear.

All parts used are quality parts. Serviced every 5000km with Penrite full zinc oil. Evo 3 gearbox just installed, replaced synchro rings and serviced with redline heavy shockproof oil ($169 for 3.75L). Has rego until August 2013. I don't really want to have to sell it but no longer have a company car so I'm having to use this as a daily and I'd rather get something more practical as a daily. Asking $16,000 Ono

Located in melb South Eastern Suburbs.

 

[ENGINR]

Nice car, goodluck with the sale mate.

 

[Gianni]

I've seen this car up close. Looks really clean
Good luck with the sale

 

[Michael]

Thanks boys

I have kept it very clean and spent a lot of money to get it to the condition it's in today both mechanically and body work. Whoever buys it will love it.

 

[BZY247]

Soooo nice that it should be illegal to be put up for sale!

 

[Evo_lu_tion]

Look great for the age of it! Is a good catch!
Good luck with sale mate!

 

[Liberoz]

is it a Vic loop hole cd9a or a gsr? have a mate looking for a gen evo 1-3 but has to be able to be nsw registered

 

[oscar]

What power did it make? What times did you run?

 

[Michael]

is it a Vic loop hole cd9a or a gsr? have a mate looking for a gen evo 1-3 but has to be able to be nsw registered

It's definately a genuine Evo 1 cd9a, how do I find out if it can be registered interstate?

Oscar, it's been road tuned so it hasn't been on a dyno, I've been meaning to throw it on just out of curiosity but haven't had the chance. I ran an 11.8 @ 120mph on my previous 100 octane tune, now it's on Eflex and goes much better.

 

[Evo_lu_tion]

Well the lancer need import plate of any kind! Yellow, Green, purple and paperwork to back it up! To be registered in NSW. This Evo 1 cd9a!
Hope this help!

 

[Liberoz]

It's definately a genuine Evo 1 cd9a, how do I find out if it can be registered interstate?

Oscar, it's been road tuned so it hasn't been on a dyno, I've been meaning to throw it on just out of curiosity but haven't had the chance. I ran an 11.8 @ 120mph on my previous 100 octane tune, now it's on Eflex and goes much better.

To be able to be NSW registered, cant be a repv vin numbered

if you look on the rego papers see what the Vin is should be ????cd9a00012456 ect
the fist set of letters (digits) before the cd9a00012456 is what determines weather it can be registered in NSW or not

 

[Michael]

To be able to be NSW registered, cant be a repv vin numbered

if you look on the rego papers see what the Vin is should be ????cd9a00012456 ect
the fist set of letters (digits) before the cd9a00012456 is what determines weather it can be registered in NSW or not

Vin starts with 6T9 there's a chassis number that starts with cd9a but there's no letters before it.

 

[Michael]

Not sure if these help....

 

[evo-gsr]

After the 6T9 does it have REPV ? Im guessing it will..

Would be easier if you just posted the whole VIN.

That way, interested buyers can check with there local authority.

 

[Liberoz]

After the 6T9 does it have REPV ? Im guessing it will..

Would be easier if you just posted the whole VIN.

That way, interested buyers can check with there local authority.

agreed It doesnt matter whats on the fire wall vin or whats on the build plate

its whats on the registration sticker vin that matters here

 

[Michael]

Vin is 6t9repv97y1twv001

 

[evo-gsr]

Oh well...that VIN counts out anyone from NSW who was thinking of buying it...RMS want nothing to do with any cars that have that prefix.
Not sure about what the other states will allow.... but NSW laws suck dogs balls.


http://www.4gtuner.com/topic/21254-moving-to-sydney-from-victoria/page__p__260731__hl__+repv%20+vin__fromsearch__1#entry260731

 

[Michael]

Damn, I never knew about that! That sucks major dogs balls, u guys have it hard. Ah well it's still good to go in Victoria!

 

[Evo_lu_tion]

That are BIG shame... EVO 1 got a surrogate Vehicle Identification Number (VIN).
NSW don't believe in that. It have to that Australia improve plate at firewall. And this is import vehicle need import aswell.

But check this out it, will tell you everything!
Is at the bottom of the Page.

http://www.rta.nsw.gov.au/registration/rego_faq.html

 

[Evo_lu_tion]

I hear that is still good at Queensland, South Australia, Victoria and north Territory but check with each states vehicle station!