ok, for door protection look here at the diagram for interior light.
[ATTACH]7071[/ATTACH]
you need to wire your wire 13 neg door trigger onto pin 10 (R-G) of connecter B64.or anywhere on the black wire that runs down the A-pillar. go for connector b64 though as you can also wire the boot protection to pin 5 (R-B ) on the same B64 connector. not sure if this will affect the auto seat belt thing, but should be ok.
connector B64 is on the junction box, near the central locking relay under dash. look here
[ATTACH]7072[/ATTACH]
