Gsr engine bay fuses/relays/ loom

[Ian91]

Hey guys, I'm in the process of reassembling my car and am trying to tidy it up as I go, today I came across a section of loom which joined to about 3 relays and 2 fuses, it also had the plugs for several parts of the aircon system, the relays and fuses are bolted to a steel plate which is mounted above the abs thingo behind the passenger light, I had a fiddle and found I could remove this section of loom from the rest of the engine bay loom.

My question is this,
Since I am not running ac anymore and have removed the compressor, dryer and the radiator looking thing; is it possible to leave out this ugly old section of loom including the relays and fuses so I can try keep my bay abit neater, without having any effect on any other parts of the car??

From what I could see and traced back it didn't plug into any other parts but I don't know if it does further down the loom or if it will make the ecu play up.

Any input is appreciated..

Thanks

 

[BMGTZ]

you can take it out no prob....but....sometimes only one fan will work after that. In some later GSRs there is also a plug on the firewall that has to go into the plug you remove the AC harness from as well. it is near the washer bottle

 

[Ian91]

Thanks Brian, the ac fan will be no worries cause I have removed that too, I'm gonna run twin thermos off the standard ecu fan system.

When you say there's another plug near the wiper bottle; do you mean I unplug the loom and then plug in this other plug? I didn't notice one if that's the case but I wasn't exactly looking for it. You said later gsr's, mine is a 95 which is a 2nd gen... Is that right?