clone
self employed bum
Gday chasing anyone who may have haltech e8 maps for gsr / evo, trying to compare my maps since i have a small throttle problem . Let me know cheers
Haltech Maps
- Thread starter clone
- Start date
Help Support 4GTuner:
clone
self employed bum
gt3071r 6 boost manaifold, 580cc inj, obviously running haltech e8, head ported, 262/262 cam i think it is.
Quick story had it tuned its running HEAPS better then it was esp the a/f ratio during all rev range on all loads. problem still it the bloody throttle position switch on start up. idle hunts abit but i cant find a base map on what it should be .
Quick story had it tuned its running HEAPS better then it was esp the a/f ratio during all rev range on all loads. problem still it the bloody throttle position switch on start up. idle hunts abit but i cant find a base map on what it should be .
JETGSR
CAPTAIN BURRITO!
use your zero throttle map
recal your TPS and add just a bees dick of throttle when you cal the closed position. this will give you a CLOSED position as far as the ECU is concerned
so it will only use the zero throttle map - hopefully this will give you a more stable idle. (you will need to tune the zero throttle map)
cant remember on the E8 whether the ign zero map pops at the same time (it does in the PS1000)
but zero throttle ign will help iron out the hunt.
check my profile i've added some screen shots of my zero throttle maps - you will need to dial it up a bit i have ID2000's on E85
recal your TPS and add just a bees dick of throttle when you cal the closed position. this will give you a CLOSED position as far as the ECU is concerned
so it will only use the zero throttle map - hopefully this will give you a more stable idle. (you will need to tune the zero throttle map)
cant remember on the E8 whether the ign zero map pops at the same time (it does in the PS1000)
but zero throttle ign will help iron out the hunt.
check my profile i've added some screen shots of my zero throttle maps - you will need to dial it up a bit i have ID2000's on E85
