Height/Clearance issues

[jerome266]

looking at solving the issue im having with the front of the vr4 being so low with the evo 3 bar on. Just got it back on the road and have already cracked the bottom lip. Can see it sgoing to be an ongoing problem. Its 100mm off the ground would like another 20-30mm to help avoid this happening too often.:fuuuuu:

Have Blue springs all round ( lovells? ) think there slightly lowered
can anyone suggest a spring ie kings or something that might give me
extra clearance at the front other than going back to standard springs or fitting bigger rims.

Suggestions?

 

[Jonson]

Coilovers? That way you can have the height exactly how you want it, plus the bonus of dampener adjustments, camber adjustments and spring rates.

 

[jerome266]

Coilovers? That way you can have the height exactly how you want it, plus the bonus of dampener adjustments, camber adjustments and spring rates.

Im looking at something as lil cheaper than coilovers to start with...
but yes they would be ideal and something ill have to get down the track !!!

 

[bazeng]

I'd save some dosh and get some coilovers.
Don't waste any money on low springs.

 

[jerome266]

its over a 1000 for coilovers id rather spend that sort of money elsewhere
at this time. what coilovers would u suggest?

 

[Entaran]

Just get BC's to begin with. Travel is a bit limited, but that will stop the front from slamming into the ground.

I have 103mm from ground to cross member, and 220mm from ground to bottom of front bar.

 

[jase]

Have you considered Evo 7/8/9 suspension if you don't want to spend the coin?

Could be worth a look..