HSG worn steering end part?

[4th]

anyone able to confirm the part numbers for a pair left/right if applicable of these

i've had a decent trawl through this section closest ive found is

Tie rod ends
Repco = TTE615R
TRW = JTE551
Transteering = TE-3612R
Price $21ea

Rack ends: Transteer RE908

or many references to this website: http://mitsubishi.epc-data.com/

advance thanks.

 

[rexhunta]

Protex TE3612R for both. Think it was about 20 bucks each, available off the shelf at Auto 1 last time i checked.

Also see if a mate or shop will lend you a tie rod separator too if you can't do the hammer trick, well worth it, and get a wheel alignment ASAP afterwards.

Just done mine.

 

[p055um5]

All of these fit just a different part number from different supliers.


Tie rod ends
Repco = TTE615R
TRW = JTE551
Transteering = TE-3612R

 

[4piknup]

http://www.ebay.com.au/itm/Draper-13914-19-mm-Capacity-Ball-Joint-Separator-/220971907742?pt=AU_Car_Parts_Accessories&hash=item3372f3ba9e#ht_1328wt_214
This is the separator I use, it doesn't wreck the boots and works well. Be aware it may damage the threads on top of ball joint, I wind nut up level with top of threads and put small plate of aluminum in there. Mine came from super cheap or similar
The tuning fork ones are crap as they damage the boots.