CLuTZ
Diamonds are forever....
Entaran said:
Entaran said:
I/C plumbing Fail
- Thread starter Missile
- Start date
Help Support 4GTuner:
Entaran
Well-Known Member
Dre. There's no contradiction in my post. They are two completely seperate statements. Maybe you should read them a little closer before posting a roll eyes next time.
Dean
Member
Would love to see flow test results, and see if it actually creates that much of a restriction.
To simply emulate this test... get your garden hose, point into flat brick wall.. turn on full blast..
It simply doesn't work. That is why almost ALL (can't be too sure) manufacturers use some form of gradual bend for intake / intercooler / exhuast piping...
I've also tested this myself building square end tanks on a past intercooler.. the engine would make a massive pinging noise everytime I gave it some gas... I had no idea what it was at the time... I have learnt my lesson!
It simply doesn't work. That is why almost ALL (can't be too sure) manufacturers use some form of gradual bend for intake / intercooler / exhuast piping...
I've also tested this myself building square end tanks on a past intercooler.. the engine would make a massive pinging noise everytime I gave it some gas... I had no idea what it was at the time... I have learnt my lesson!
Entaran
Well-Known Member
Well yes and no baz. Gas flow doesn't follow the exact same laws as liquid flow, but it's similar. The piping would be shitful but it would still work.
It was a twin pass cooler system where the in/out are on the same side.
The end that did the U turn was square. This was the problem. I changed it to angled and it got rid of the problem.
As for pinging, it was basically a constant marble rattling in the engine sound. Once the tanks were fixed, the noise went away.
The end that did the U turn was square. This was the problem. I changed it to angled and it got rid of the problem.
As for pinging, it was basically a constant marble rattling in the engine sound. Once the tanks were fixed, the noise went away.
BYBY5L said:
But you're a kiwi bro so thats sweet aye! :lol:
Disclaimer: As there has been a lot of shit fighting on this forum lately, I just really want to reiterate the smiley face and confirm that this is said as light hearted as possibly! I know that Jamie is a good lad and didnt take any offence to the statement, hence there was really no need to type this out, but I did anyway. In addition; and to the entire community, I will also like to exclaim that whilst reading this disclaimer, please feel free to lick your chops!
I was gonna say the piping was imported from NZ, cheap as chips it was eh bro, if he's true Kiwi Brother it will also have a external waste gate welded to athe exhaust manifold and a screamer pipe and a gizmo chip Bahahahaaa
please feel free to follow this kids lead in going backwards and not forwards in his modification path lol
THIS MIGHT BE CHEAP CAR TO BUY AS THE MOTOR IS ALREADY 80% DONE IN
Disclaimer: As there has been a lot of shit fighting on this forum lately, I just really want to reiterate the smiley face and confirm that this is said as light hearted as possibly! I know that Jamie is a good lad and didnt take any offence to the statement, hence there was really no need to type this out, but I did anyway. In addition; and to the entire community, I will also like to exclaim that whilst reading this disclaimer. I AGREE MISSILE
please feel free to follow this kids lead in going backwards and not forwards in his modification path lol
THIS MIGHT BE CHEAP CAR TO BUY AS THE MOTOR IS ALREADY 80% DONE IN
Disclaimer: As there has been a lot of shit fighting on this forum lately, I just really want to reiterate the smiley face and confirm that this is said as light hearted as possibly! I know that Jamie is a good lad and didnt take any offence to the statement, hence there was really no need to type this out, but I did anyway. In addition; and to the entire community, I will also like to exclaim that whilst reading this disclaimer. I AGREE MISSILE
