increase psi ??
- Thread starter FLIBYUGSR
- Start date
Help Support 4GTuner:
Dean
Member
get urself a manual boost controller,
they're tiny, bout 5cm tall, pretty easy to hide within an engine bay
http://www.gfb.com.au/index.php?par...ption=boost_controllers&sub_sub_option=atomic
they're tiny, bout 5cm tall, pretty easy to hide within an engine bay
http://www.gfb.com.au/index.php?par...ption=boost_controllers&sub_sub_option=atomic
plumb a restrictor (say metal) in the vacuum tube to the wastegate, this will decrease flow to the actuator and keep your wastegate closed enough to allow higher boost. you will have to experiment with the size of the hole you drill. this will however be COMPLETELY hidden as you requested and provide the same type of boost control an mbc provides.
cheers
cheers
3zercrowd
Donating Member
Turbotech!>>>Ebay
GSR94T
Well-Known Member
3zercrowd said:
+1 !!
$37 shipped, and they work 100% and have not had a boost spike at all!
http://cgi.ebay.com.au/Turbotech-ma...yZ130654QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
JAP63
E III Recaro Pilot
A restrictor of a set size..eg..3mm O.D with say a 1.5mm hole through the middle might for example work and give you the boost you desire..youd have to play around with sizes.
It will also snap the boost on better too.
It will also snap the boost on better too.
CLuTZ
Diamonds are forever....
Bend the wastegate actuator arm
abyz
競争の精神
someone correct me if i'm wrong, but you could just use the stock gsr bov. it only can support a max of 12-13 psi.
Dean
Member
we're talking boost controllers not bov's.. 2 different thingsabyz said:
abyz
競争の精神
Dean said:we're talking boost controllers not bov's.. 2 different thingsabyz said:
I know what you talking about. but he's asking...
using the stock bov. will keep it looking like factory. yes?
I dunno im just a noob :?
Dean
Member
lol,
bov and boost controllers are 2 different items.
if u keep your stock blow off valve then yes ur blow off valve would look factory.
but to increase the boost you must alter your boost lines. You do this by installing a boost controller, or restrictors as discussed.
if you are referring to keeping the stock bov to keep it looking standard then yes u would be correct, but to up the boost you would need to play with the boost lines.
bov and boost controllers are 2 different items.
if u keep your stock blow off valve then yes ur blow off valve would look factory.
but to increase the boost you must alter your boost lines. You do this by installing a boost controller, or restrictors as discussed.
if you are referring to keeping the stock bov to keep it looking standard then yes u would be correct, but to up the boost you would need to play with the boost lines.
abyz
競争の精神
LOL yes i know they are 2 different items. im using a black gfb manual bleed valve @15 psi... and i also use a APS BOV to support the boost. however if i put my stock bov back on as i do, it sticks to 12-13 psi.
what im trying to say is u can run a hose from the intake to actuator (without adding the bleed valve/any type of restrictor). just use the stock gsr BOV because it can only support up to 12-13psi.
what im trying to say is u can run a hose from the intake to actuator (without adding the bleed valve/any type of restrictor). just use the stock gsr BOV because it can only support up to 12-13psi.
The Godfather
Banned
FLIBYUGSR said:
why do you want it hidden?? are you gonna race people and tell them its only running stock boost?? lol
seriously im curious why you want it hidden?
