Lese Alafaio
Well-Known Member
does anyone know where i can get a pair of inner liners to suit both L and R evo front guards?
Inner Liners
- Thread starter Lese Alafaio
- Start date
Help Support 4GTuner:
EV0300
Well-Known Member
ive been looking for a pair for i think almost a year now, you most likely wont find them but i pretty much pulled the old ones out and have had no issues so dont think you really need the tbh.
4piknup
master of none
They are pretty rare. But only black plastic. I think you could weld 2 inners together to make it work. That is what I would probably look at doing.
You will probably need them if you going over the pits
You will probably need them if you going over the pits
evo-gsr
Well-Known Member
Commonly known as splash trays / guards.
Tried calling Mitsubishi ?
Be prepared to get raped for them if you can get them but.
You will need to know what bumper bar you are going to use them with too as they are slightly different between the models due to the bumper mounting points. A fiberglass bar won't have the mounting points you need either.
Then you may need an Evo chassis number too.
Tried calling Mitsubishi ?
Be prepared to get raped for them if you can get them but.
You will need to know what bumper bar you are going to use them with too as they are slightly different between the models due to the bumper mounting points. A fiberglass bar won't have the mounting points you need either.
Then you may need an Evo chassis number too.
Lese Alafaio
Well-Known Member
raped? hahah fuckin hell lol
anyways, thanks ima lookinto it more =)
wait do youneed liners to pass the pits?
anyways, thanks ima lookinto it more =)
wait do youneed liners to pass the pits?
4piknup
master of none
Lese Alafaio
Well-Known Member
4piknup
master of none
http://www.camskill.co.uk/m8b0s2287p21553/_MITSUBISHI_OE_GENUINE_PARTS_SERVICING_PARTS_TUNING_SPARES_and_SERVICE_ACCESSORIES_-_Front_Wheel_Arch_Liner_-_Rear_Section_Mitsubishi_Lancer_Evolution_2_3_CE9A
you need the rear section too. They look right to me, but i didnt know they were 2 piece. Better wait for the other guys to confirm.
but at what will probably end up being $300 posted, i would still be looking at plastic welding 2 gsr ones together.
Btw, nice find
you need the rear section too. They look right to me, but i didnt know they were 2 piece. Better wait for the other guys to confirm.
but at what will probably end up being $300 posted, i would still be looking at plastic welding 2 gsr ones together.
Btw, nice find
Lese Alafaio
Well-Known Member
could you plastic weld mine?
