Intercoolers

[Colonel]

Hey i was wondering how you guys rigged up your coolers

 

[Jason Broadhurst]

Mine has a pipe from the turbo, and then a pipe to the throttle body.

 

[3zercrowd]

:roll: Yes nice one Jason :lol:

Mate use the search feature and type in "intercoolers"

Plenty of info on the forum already.

Search button is your friend :wink:

 

[GSRSOL]

Mine has a pipe from the turbo, and then a pipe to the throttle body.

:lol: had to be said

 

[Missile]

speak to rogercordia...

http://4gtuner.com/forums/viewtopic.php?t=6081

 

[Colonel]

turns out i know who roger is and i wouldn't consider having a conversation with such a fool unless it involved me slapping him

 

[GSRSOL]

turns out i know who roger is and i wouldn't consider having a conversation with such a fool unless it involved me slapping him

you might want to give us a bit more info so we can answer your question properly :wink:

 

[Colonel]

the pipe on mine runs directly behind the cooler so its like 4 inches further forward than it needs to be

 

[DOUGMO]

.

more info?

 

[Colonel]

as you can see its slightly dodgy

i really wanna move it back and put a full non mutilated frontbar on. any advice?

 

[vsthis]

That does not look healthy at all mate!!! Are you going to keep the intercooler you have or are you going for a new one? I'm just about to install the meek cooler piping kit. I'll let you know what it's like. It's designed for the evo or similar cooler though as the pipe follows the standard route.

 

[Colonel]

i was thinking about buying an evo cooler but i don't know if i'm better off keeping the same one and just macgyvering up the plumbing

 

[GSRSOL]

are you still using the standard TD04 turbo?

 

[Colonel]

yes

 

[GSRSOL]

you could do it like mine, although i think where the pipe runs under the rad support on the passenger side might hang down a little low. If you had a lip on the bar it would look fine :wink:

 

[Colonel]

i was thinkin maybe bring the pipe over the top of the cooler...

 

[vsthis]

The meek piping and evo cooler might be a bit big for the TDO4. But the cooler you have is probably way too big aswell. Are you thinking about upgrading the turbo any time soon?

 

[vsthis]

The meek kit follows the evo route but is 63mm in diameter. Here's some pics:

Pics stolen from here: http://4gtuner.com/forums/viewtopic.php?t=6349

 

[Colonel]

a turbo upgrade had crossed my mind but i am currently cash deficient...

i might even swap this

for a 4g93 if i can get the money situation sorted

 

[Colonel]

do you know of any off the shelf kits availiable for a 93?