LED Park Lights

[unhuman]

So I'm in the middle of converting all bulbs in my Libero from incandescent to LEDs.

So far I've done all off the interior, I'm now onto the exterior.

I have bought a set of bayonet LED park lights to fit, however only the driver’s side lights up with them installed. I know it's not a fault with the LEDs because if I swap them from each side the drivers still works and the passenger side doesn't. They both work fine with incandescent bulbs.

I have seen in this thread that apparently the park light positive and negative wires need to be reversed in our cars?

http://www.4gtuner.com/topic/19764-whiteclear-parkers/-

Before I go cutting can anyone else confirm this? Thanks.

 

[evo-gsr]

Had the same problem with my Legnum.
switched the wires on one side and it fixed the problem.

 

[unhuman]

Thanks, will give this a go tonight.

 

[EVOCPE]

Ive just recently done this too, you should be able to use a pin to get the terminals out and just swap them around, or buy a new 2 pin plug from supercheap or autobarn

 

[unhuman]

Good tip EVL20T, swapped the terminals over fine.

Confirmed working, so glad to sort this.