Lightend flywheel

[Gabara]

Hey going everyone,iv been told you can get 3kg flywheel to suit Gsr and Evo is that correct and would anyone know where can get them from, thanks

 

[Gianni]

Not sure about gsr. But Evo u can get through upper cheap auto I think. I remember coming across it when I was looking for a 6 bolt flywheel. Which they don't have. Grrr

 

[BMGTZ]

fidanza do both 6 and 7 bolt 4g63 flywheels

 

[Smutt]

I had no success in getting a light flywheel for the gsr (1.8), they (not ubber cheap) have a listing in the book but was told they are not available anymore. All that was available was the "moly" version that saves two fifths of f**k all weight, for the expense I passed on that.

 

[Gianni]

Yeah. The vr4 has a wider flywheel. I'm currently doing the ggsr. Which they didn't do. Only after did I realize it still cleared the bell housing. Ha ha ha. Next time though

 

[Gianni]

Yeah. The vr4 has a wider flywheel. I'm currently doing the ggsr. Which they didn't do. Only after did I realize it still cleared the bell housing. Ha ha ha. Next time though

 

[JSTYLE]

I had no success in getting a light flywheel for the gsr (1.8), they (not ubber cheap) have a listing in the book but was told they are not available anymore. All that was available was the "moly" version that saves two fifths of f**k all weight, for the expense I passed on that.

You only need a lightened flywheel when u go a special clutch
93's are fine with the standard flywheel and a good clutch!

Jon

 

[Lister]

I currently have a fideza light weight flywheel to suit early evo. Everything is forsale at the right price.

 

[Gabara]

Iv got an 4g63 with. Gsr box iif it matches might consider Lister. What's the oem flywheel weight anyways of Earley Evo would anyone know

 

[Gabara]

If u have a have Gsr box with a 4g63 engine then do u need a 6 bolt 4g63 flywheel is that correct?

 

[Gianni]

Depends if it's a galant or an Evo block

 

[Gabara]

Ginani thanks for replying man I dono Ay, I know it got Evo manafold and intercooler all that, but my rocket cover is vr4 100%, meek said it's Evo motor but for certain I dont know, alot of people tell me differnt things, would I tell with my engine number

 

[Gianni]

Well I'm about to buy a 4g63 wit Evo head but vr4 block. Honestly I don't know how to tell unless the gearbox is off. Actually. If u take the aluminum shield off which is between gear box and engine (from under The car) u should be able to see the bolts. Mark bolt one then turn the engine around by hand and count till u get to the start vr4 is 6 Evo is 7 bolt. Gsr galant is 6 but smaller flywheel

 

[Gabara]

I'll check it out tonight thanks Gianni

 

[youda]

lancer gsr and evo 123 flywheels are the one and the same vr4s are different., another way to check if you have a vr4 or evo block is by checking the sump under the timing belt cover. run nyour fingers along the sump if its smooth it a vr4 motor, assuming the sump is the original. if there is a groove its a 7bolt. you can do this check without removing anything from the car or motor.

 

[Gabara]

Thanks Youda I'll check that out aswell, so if I do end up having a Evo block can i use Evo flywheel with my Gsr box and is the Jspec Gsr box the same as the aus

 

[Gianni]

When u go buy the flywheel. Just compare the diameter. I'm sure the only difference is the bolts. I thnk vr4 is 225 or something. Maybe that's the clutch. I can't remember. Ha ha ha. The vr4 fits in Te gsr lancer box. If Evo is smar diameter it will fit too or get an Evo ox he he he

 

[Gabara]

thanks Gianni , Youda i checked the sump underneath the timing it has a groove but just to double check i was looking at the correct place i took the photo of it you can also see the groove in the photo

so what do u think boys is that the groove is it evo block ?

cheers in advance

 

[youda]

after some extra thought i had a lancer gsr gearbox bolted up in my vr4 with no problems. the only differance is if the flywheel is a 6 bolt or seven bolt. at least the only vital differance anyway. (this only aplies to turbo models. n/a and fwd may be a completly different story.)
looking at your picture tells me it is an evo block or at least sump anyway.

 

[Gabara]

Thanks Youda Gianni I have clear understanding now, so by visual shows an Evo block and doesn't affect my driveline being Gsr, so if it's vr4 should be 6 bolts and Evo 7 bolts cheers guys much appreciated