4piknup
master of none
Gongrats for tomoz
Looking for a 4G63 to rebuild.
- Thread starter GeoKez
- Start date
Help Support 4GTuner:
Thanks fellas.
Your right George, sometimes we tend to forget what really matters when shit happens.
Best of luck to you Ben. Scary shit, but feels good all the same.
Game on! See you on the other side.
Velocity Racing
Well-Known Member
Congratulations George... Hope it was an epic day (I'm sure it would have been!!)
Well, I'm a married man. God help me.
The MRI results on wifeys knee were not good news, she's got a torn ACL, PCL and MCL plus a tibial plateau compression fracture, means sweet F/A to me but it has her in a leg brace and on crutches for another 4 weeks. So I'm house bitch to 3 boys, and myself, but we are doing alright. I found the scissors today, so I was able to cut arm holes in the onion sacks, the boys say that it's much more comfortable now, but it's still a bit itchy. Their also banging on about food or some shit, I'll sort that out on the weekend.
On a more car related subject, with the help of a mate, managed to find a set of the same FIN 7 rims on Ebay. These are a good find for me as I don't have any spare rims that fit over the front brakes. Now I just have to decide if I'm going to paint them white or leave them as is....??
http://www.ebay.com.au/itm/300896822102?nma=true&si=2ogNVgicdqAG%2FiWiRJaCpQDRbAI%3D&rt=nc&_trksid=p4340.l2557&orig_cvip=true
The MRI results on wifeys knee were not good news, she's got a torn ACL, PCL and MCL plus a tibial plateau compression fracture, means sweet F/A to me but it has her in a leg brace and on crutches for another 4 weeks. So I'm house bitch to 3 boys, and myself, but we are doing alright. I found the scissors today, so I was able to cut arm holes in the onion sacks, the boys say that it's much more comfortable now, but it's still a bit itchy. Their also banging on about food or some shit, I'll sort that out on the weekend.
On a more car related subject, with the help of a mate, managed to find a set of the same FIN 7 rims on Ebay. These are a good find for me as I don't have any spare rims that fit over the front brakes. Now I just have to decide if I'm going to paint them white or leave them as is....??
http://www.ebay.com.au/itm/300896822102?nma=true&si=2ogNVgicdqAG%2FiWiRJaCpQDRbAI%3D&rt=nc&_trksid=p4340.l2557&orig_cvip=true
4piknup
master of none
+1 for baz
They look good as is.
I dont mind black, but not white. They are forever dirty.
Charcoal for me is best (cant notice the brake dust)
They look good as is.
I dont mind black, but not white. They are forever dirty.
Charcoal for me is best (cant notice the brake dust)
Agree with you both, and Jack thats the same reason I painted the wheels on my XR fucus black, I hate brake dust. If all 4 four rims look good enough when they get here, I might do the swap to polished.
I've been to rookie night for the Targa tonight Jack, I'll reply to your pm tomorrow morning.
I've been to rookie night for the Targa tonight Jack, I'll reply to your pm tomorrow morning.
4piknup
master of none
Hey. That looks alright.
I really like the evo 1-2 front bar on it, its a lot more subtle
I really like the evo 1-2 front bar on it, its a lot more subtle
Not much going on with the '63 Build. Waiting on Brad to pull his box out, and need to go down and see Brian to buy a rear diff. After the weekend of the 24/25 this month, it's game on to start the swap. A mate dropped over a twin motor window washer bottle yesterday that I'm going to make an IC sprayer setup. Intake temps are up into the high 50's after a good run, be nice to try and get them down, certainly need to find a bigger IC for the stroker.
Some video of my last run yesterday at MC Sprints, after fixing the spark plug disaster. New R888's don't feel any good, but I was pissed at this stage andwasn't really driving any good was driving worse than normal. :unsure:
[media]https://vimeo.com/66031791[/media]
Some video of my last run yesterday at MC Sprints, after fixing the spark plug disaster. New R888's don't feel any good, but I was pissed at this stage and
[media]https://vimeo.com/66031791[/media]
BMGTZ
Grumpy old man from the school of hard knocks
MOAR revs....lol
I promise you Brian, all the footage from Targa SW will show me in a skirt!
It was a testing day to say the least, was glad just to have a car that could rev to 6k (7200 was the recorded highest on Haltech)
Pump Hill stage being the last hoorar stage for this '93, I'll dial up some bigger numbers for you mate, promise
BMGTZ
Grumpy old man from the school of hard knocks
do they make flame proof skirts?....
Hmmm, A onesie skirt, I'll go talk to Ivan at Go Gear, they might have something
New rims arrive just in time. Look really good in the silver.
Hmmm, A onesie skirt, I'll go talk to Ivan at Go Gear, they might have something
New rims arrive just in time. Look really good in the silver.
View attachment 11475
Got a set of these shoes on my Evo 1, look good and light too
^^ Yep, really happy with them. Reasonable price for 2nd rims that have never even had a tyre fitted to them. I will cover them with forum member EIII's new soft Z221's so at least I have a choice over the 888's
Hope you smoked that CommaCoupe!
Hope you smoked that CommaCoupe!
Hey ya Ben. Good to see you checking in mate. You should be married by now yeah? Hope it went well, and hope its the start of long happy life for you guys.
Really looking forward to the weekend. I'll post up some video when we get back.
Really looking forward to the weekend. I'll post up some video when we get back.
