maroso alloy sump

[VR42LT]

Hey guys i have one of these on my vr4 and was wondering who else has one? Just curious to know how much oil you are running? The website for maroso says 6.25 quarts which is about 5.9L but if i go off the dip stick its more like 7L im putting in. Which leads to my other question are the 4g63 block dip sticks the same as the 4gcs block dip sticks im running a 4g one in a 4gcs block. I know you have to allow for filters and oil gallaries to fill but i think im over filling.

* the stock amount of oil is 4.4L on a 4g63

Any help on this would be greatly appriciated fellas

 

[EVOCPE]

No, they are all different, here is some info EVO00X and myself found

The dipstick tubes are the same part number for the GVR4 and EVO.
But the dipsticks themselves are different in length by 5mm because the EVO sump and GVR4 sump are different.

Lengths are ....
EVO = 500mm full length of dipstick from tip to tip (including handle)
VR4 = 495mm full length of dipstick from tip to tip (including handle)

EVO = 455mm from the stopper to the tip of the dipstick.
VR4 = 450mm from the stopper to the tip of the dipstick.

 

[EVOCPE]

No if someone can measure up a stock dipstick from a G4CS and we can compare all

 

[runuts]

From the info I have

Evo1/2/3 use dipstick tube MD124782
however evo 1 til 1/3/1993 use dipstick MD127058

From 2/3/1993 evo 1 thru to evo 3 use dipstick MD306345

 

[DOUGMO]

the later model 64 blocks need to run the 64 dipstick so this maybe the same