Micrtech lt8 problem

[DZN60]

Ok so I've checked everything power fuses changed the mpi relay....and still can't get my gsr to start....there is power goin to the plug on the microtech on pins 1,4,5,6,7 on the top of the plug but nowhere else...a few mates tell me the green light should be on then when cranking it the yellow should flash....but I have no lights at all help please!!!!!

 

[evopwr]

maybe start off with acquiring/download the microtech technical manual and go from there?

 

[DZN60]

I was just gonna give them a call Monday ....but would there be another fuse on the wirering to the microtech plug?

 

[TMAK]

if it helps, i have the pdf and wiring diagram.
pm me an email address and i can send em to you.

 

[DZN60]

if it helps, i have the pdf and wiring diagram.
pm me an email address and i can send em to you.

I aready have a wiring diagram but email it anyway ....btw this isn't a new ecu install it's been in the car since I've owned it....the thing I can put it down to is I've been disconnecting the battery and reconnecting it maybe this has cause the problem??

 

[boost_lover]

are all the plugs pushed in? I know there is a small plug that supplies power the the unit.

 

[DZN60]

All the plugs were in there is 3 in total a real small 1 a big 1 and a medium 1 and a vacume line should 1 of the small plugs have power coming out of it?