Mitsubishi FTO Climate Control Aircon suits Lancer/Mirage

[ralliart20]

Hey all,
I removed this climate control setup from a Mitsubishi FTO GPX intending on putting it in my CE Lancer but never got around to it.
Includes:
-Climate Control Unit
-Evo Dash surround
-Air Intake Housing
-Evaporator Housing (A/C)
-Heater Unit (Needs water Pipes replacing as one is broken)
-FTO Dash loom with the plugs required to splice the system in.
$200
Pickup only from Melbourne / South Morang.
[email protected]

 

[khubner1]

if lack of interest i'd be interested in the fan resistor located in the evap box (the one the ac gas goes into. pm me if you feel like separating it

 

[Jayz-1]

Are all the required sensors connected to the loom? Sunlight sensor? Temp sensor? Etc?

Regards
Jason

 

[4piknup]

if lack of interest i'd be interested in the fan resistor located in the evap box (the one the ac gas goes into. pm me if you feel like separating it

there is not much to them K. pull it apart and redo the solder connections. i think they use low temp solder, and probably safer to try that first

 

[khubner1]

Jack I need the resistor because its a completely different part to the one in non climate models. The one I have for my non climate unit is fine. I just need one to suit climate controll