Hi. I came across this site while browsing the web for some parts. I've owned my Mitsubishi Colt CJ4A for 5 years now and its gone through some transformations in that time, lol. It started life as a completely standard 1.6 Colt. I then had a 1.6 Mivec conversion done and had nothing but problems with it, no thanks to the guys that installed it ! So I decided to build my own engine and install it myself. Then one thing led to another and now its waiting to be featured in a couple of magazines 
The engine as it stands is a 4G93 Turbo Mivec. I've had the bottom end Forged with pistons slightly oversized. I'll let the spec list do the talking and post some pics up too
> 1.8 turbo forged bottom end (0.5mm oversized CP forged pistons, K1 forged rods and ACL race bearings)
> ARP headstuds
> HKS SSQV 3 dump valve
> 1.6 Mivec cylinder head (standard for now )
> 1.3 gearbox with Mivec LSD
> Toda Racing lightweight flywheel
> Custom 5 paddle race clutch
> Evo 4/5/6 throttle body with bored out inlet mani to match
> standard TD04 turbo from the 1.8 engine
> SARD adjustable FPR
> 255LH fuel pump
> longlife custom made cat back exhaust
> Standalone ecu
> Evo 4/5/6 3 point front upper brace
> Seam welded engine bay and then smoothed
> rewired the whole car ! The fuse box is now in the boot
> Battery in boot
> Wire tucked engine bay
> Evo 6 brake servo and master cylinder
> Evo 5-9 Brembo calipers front and rear
> Adjustable brake bias valve mounted on the dash
> Drilled and grooved discs
> Bluestuff NDX fast road/track
> Hel braided brake hoses
> Polybushed the whole car
> BC Racing Coilovers
> 17" 3 spoke super Advan alloys with goodyear eagle F1 tyres
> 20mm hub centric spacers (might go wider)
> Re-undersealed the car
> Defi gauges
> Blitz boost controller
> Custom wide arches
> Evo 5/6 sideskirts
> Ghost rider rear bumper with custom made rear diffusers
> Standard front bumper with custom fog holes and MS design splitter.
> Heko wind deflecto
> Honda Civic spoon style wing mirrors
> Evo 5/6 style carbon fibre bonnet
> Honda civic (EK9) carbon fibre spoiler
> smoothed tailgate
> EVO 5 front and rear seats
> omp 3 point harnesses
> mono steering wheel and gearstick
> flocked dash
I think thats most of it ? lol. All the work has been done by myself with a little help from some friends, apart from the Bodywork which was done by a company called Xquisite. Here are some pics
The engine as it stands is a 4G93 Turbo Mivec. I've had the bottom end Forged with pistons slightly oversized. I'll let the spec list do the talking and post some pics up too > 1.8 turbo forged bottom end (0.5mm oversized CP forged pistons, K1 forged rods and ACL race bearings)
> ARP headstuds
> HKS SSQV 3 dump valve
> 1.6 Mivec cylinder head (standard for now )
> 1.3 gearbox with Mivec LSD
> Toda Racing lightweight flywheel
> Custom 5 paddle race clutch
> Evo 4/5/6 throttle body with bored out inlet mani to match
> standard TD04 turbo from the 1.8 engine
> SARD adjustable FPR
> 255LH fuel pump
> longlife custom made cat back exhaust
> Standalone ecu
> Evo 4/5/6 3 point front upper brace
> Seam welded engine bay and then smoothed
> rewired the whole car ! The fuse box is now in the boot
> Battery in boot
> Wire tucked engine bay
> Evo 6 brake servo and master cylinder
> Evo 5-9 Brembo calipers front and rear
> Adjustable brake bias valve mounted on the dash
> Drilled and grooved discs
> Bluestuff NDX fast road/track
> Hel braided brake hoses
> Polybushed the whole car
> BC Racing Coilovers
> 17" 3 spoke super Advan alloys with goodyear eagle F1 tyres
> 20mm hub centric spacers (might go wider)
> Re-undersealed the car
> Defi gauges
> Blitz boost controller
> Custom wide arches
> Evo 5/6 sideskirts
> Ghost rider rear bumper with custom made rear diffusers
> Standard front bumper with custom fog holes and MS design splitter.
> Heko wind deflecto
> Honda Civic spoon style wing mirrors
> Evo 5/6 style carbon fibre bonnet
> Honda civic (EK9) carbon fibre spoiler
> smoothed tailgate
> EVO 5 front and rear seats
> omp 3 point harnesses
> mono steering wheel and gearstick
> flocked dash
I think thats most of it ? lol. All the work has been done by myself with a little help from some friends, apart from the Bodywork which was done by a company called Xquisite. Here are some pics
