cbrkp
Well-Known Member
Hey ya'll,
I'm going to be porting the stock turbo on my Evo I (wastegate and o2 housing). I would like to put in a stainless steel oil feed line while I'm at it but I not sure which one I need, any idea which out of the two links below I will need? my car is stock btw
I heard the first link should be ok but how about the 2nd link? Can I install the 2nd link near the stock location where the oil filter is? taking out of one the bolts and replace it with the fitting? like so: http://www.roadraceengineering.com/instructions/oillineinstall.htm
Or should I just go with the first link for ease,prevent leaks etc.?
1. http://www.extremepsi.com/store/customer/product.php?productid=19185&cat=263&page=1&veh=2G DSM
2. http://www.extremepsi.com/store/customer/product.php?productid=17334&cat=263&page=1&veh=2G DSM
On a side note are there any NECESSARY replacement parts I should get before hand so when I put the turbo back after the porting I will have all the parts I will need?
heres the list of these items I've gathered so far:
manifold to turbo gasket
manifold to turbo bolts and nuts
o2 housing gasket
downpipe gasket
02 housing to downpipe bolts and nuts
thanks 8)
I'm going to be porting the stock turbo on my Evo I (wastegate and o2 housing). I would like to put in a stainless steel oil feed line while I'm at it but I not sure which one I need, any idea which out of the two links below I will need? my car is stock btw
I heard the first link should be ok but how about the 2nd link? Can I install the 2nd link near the stock location where the oil filter is? taking out of one the bolts and replace it with the fitting? like so: http://www.roadraceengineering.com/instructions/oillineinstall.htmOr should I just go with the first link for ease,prevent leaks etc.?
1. http://www.extremepsi.com/store/customer/product.php?productid=19185&cat=263&page=1&veh=2G DSM
2. http://www.extremepsi.com/store/customer/product.php?productid=17334&cat=263&page=1&veh=2G DSM
On a side note are there any NECESSARY replacement parts I should get before hand so when I put the turbo back after the porting I will have all the parts I will need?
heres the list of these items I've gathered so far:
manifold to turbo gasket
manifold to turbo bolts and nuts
o2 housing gasket
downpipe gasket
02 housing to downpipe bolts and nuts
thanks
8)
