Parts and Part Numbers?

4GTuner

Help Support 4GTuner:

Dr_Twist

Member
Joined
Apr 7, 2006
Messages
49
The Brake booster in my Car needs replacing at the same time i am Planning to put a seal kit in both frount Calipers. I own a GSR, however i have Twin Piston Frount Calipers. No idea if there VR4 or EVO 1-3 but they are ABS.

So i pulled up this thread:

http://4gtuner.com/forums/viewtopic.php?t=5674

What i would like to know is, Is the EVO 3 Brake Booster the same as the GSR brake Booster?

Power Brake Booster:
MR129408 Booster assy., brake

And the Calipers, i have, no idea if they are VR4 or EVO 1-3 would the Seals kit in the same Thread fit the same Calipers?

MB857840 Seal kit, Fr. brake caliper pistons

And if need be would any of the other parts on that list for the Caliper match what i have?

Front Wheel Brake:
MB950176 Caliper kit, Fr.brake, LH
MB950177 Caliper kit, Fr. brake, RH
MB857840 Seal kit, Fr. brake caliper pistons
MB151403 Bolt, Fr. brake caliper mount
MF450407 Washer, Fr. brake caliper mount
MB928049 Front brake pad set (MR389544)


I know there may be differant revision's so if there is, when taking it apart how would i know which revision would i have in the car, So would it be VR4, EVO 1-3 or something else?

Thanks, Dr_Twist.
 
3zercrowd said:
Dr_Twist said:
What i would like to know is, Is the EVO 3 Brake Booster the same as the GSR brake Booster?


Thanks, Dr_Twist.

They are the same 1 INCH bore.

Some vr4s are 15/16 and some vr4's are 1 inch as well

Have a look here and RING OR EMAIL.


http://www.cvap.com.au/?StartAt=40&...=Lancer_EVO/GSR/vr4&search=Lancer_EVO/GSR/vr4

$145 from CVAP

Thank you for that, i have sent an enquire about the part off.

Any help with the calipers would also be a great help!

Thanks, Dr_Twist.
 

Latest posts

Back
Top