Pics of EVO Accelerator, Brake and Clutch Pedal Assemblies

[ENGINR]

Hey Gents,

I need some pics of an assembled EVO pedal brake and accelerator and clutch setup. I've forgotten how and where the springs are meant to go!! :wacko:

 

[EVOCPE]

Clutch

If you need any more pics, let me know coz i have it in the shed

 

[ENGINR]

Thanks Mike - that's ace!

 

[EVOCPE]

See if this link works, i just took it today

https://www.dropbox.com/s/vadbu72cvgz6gxo/20120604_171145.jpg

 

[ENGINR]

Link works mate - thanks again. In regards to the EVO clutch pedal assembly - it only has the one big spring on the side of the pedal right? The non-EVO clutch pedal assemblies have the small spring at the top, like the brake pedals, which I've been using on my EVO clutch pedal assembly, as I've only just got my hands on the big EVO clutch spring.

I'm struggling to see how the big spring on the side will make the pedal return after being pressed, as it looks like it's not compressed or anything.

 

[EVO-00X]

Here you go

 

[ENGINR]

Cheers guys. In those pics, it looks like the pedal is forward (ie depressed) and the spring is not compressed. So how does it work? If the spring is not in compression, it won't do anything.

 

[ENGINR]

Cheers guys. In those pics, it looks like the pedal is forward (ie depressed) and the spring is not in compression. So if the spring is not in compression, it won't do anything, so how does it work?

 

[DOUGMO]

the spring is to help to presss the pedal(make it easier), not return it

 

[4piknup]

As dougmo says, works like a over centre spring. You compress it for the first part, then it helps you for the rest.
Makes the pedal lighter

 

[ENGINR]

So there's no other spring at the top of the pedal (like the brake and accelerator pedals) to help it return?

 

[EVO-00X]

You know, i wrote the same thing as dougmo but edited my post because i wasnt too sure about it being the only reaso, so i only left the pic. Lol
The pedal will return on its own due to the resistance of the pressure plate pushing it back.

 

[khubner1]

the return of the pressure plate pushing the fluid back up to the master the returns the pedal