recipe for 300kw atw

[4piknup]

So the time will be coming to put the parts order in for the g4cs 2.4 6bolt.
The goal is to run into 10s on the 1/4 with I think mid 10 as achievable...
So I think I will need a good 300kw atw. I will be using a auto box, e85 is not available, weight is around 1200kg, and awd. W2a intercooler, gt35r turbo and bc280 cams.

Is there any advantage to running 7bolt pistons over 6bolt jobbies (with suitable rods) or just stick to 6bolt rods and pistons.
Will eagle rods and wiseco pistons suit my build?

Those with secrets are welcome to pm.
Cheers

 

[captainTeeBag]

How about a bit of giggle gas to help spool that big turbo up

 

[ONPSI]

You won't need nos..300kw atw is within reason.

 

[4piknup]

If needed just for launch.. but will see how the big 2.4 goes
thinking it might need a .86 compressor instead of the 1.06. But I have been reading about mivec for the intake cam only. But thats for another thread

 

[bps79]

From what I've been told e85 will be available from united very shortly

 

[GeoKez]

Can't help with the tech Jack, but have some of your shopping list if you go the way you plan. Brand new BC280's and some used but good nick 6 bolt rods and pistons as sweetener. If your looking.

 

[caged]

You wont need mivec to spool that on an auto. a basic set up will make that power easy.