reservoir feed line?

[mathew_colville]

This rubber pipe off the master cylinder has tiny bubbles in it and one of them has burst so im in need of one of these lines (just by googleing it i presume its called the reservoir feed line but i could be wrong)

my car is a lancer gsr 4g93t, I need one asap so what options do i have?

can i get the line off a stock cc lancer or are they different?any common car that i can get one off at the wrecker?
do i need to order one? does anyone know the code for it and can i get it from amayama (may take to long) or if there not to expensive from my mitsubishi dealer?

thanks
mat

 

[EVOCPE]

Clutch line, any cc lancer glxi/gsr/evo123 will fit

of buy this and never have issues

http://pages.ebay.com/link/?nav=item.view&id=271314003716&alt=web

 

[EV0300]

Got a stock e3 one in good condition 25 posted if you want

 

[mathew_colville]

Clutch line, any cc lancer glxi/gsr/evo123 will fit

of buy this and never have issues

http://pages.ebay.com/link/?nav=item.view&id=271314003716&alt=web

so can this replace the whole thing from master to slave cylinder or is it only for the rubber section (it looks quite long in the picture), i wrecked the nut on the flare tubing trying to undo it, so im presuming you cant replace the nut without cutting the flared bit off then itll be too short?

 

[4piknup]

If you undoing the flare nuts, you have no chance with a open ender. You have about 25% chance with tube spanners. Best is vice grips, not multigrips. But they mark the nuts pretty bad.

can only replace the nut by cutting off the flare and redoing the double flare. But you could do it up with vice grips and undo with same, next time.

 

[khubner1]

If youve messed up the flare go raid a cc glxi and take the whole kit from slave to master

 

[mathew_colville]

thanks everyone for your replys
i ended up just getting the rubber piece from the wreckers, the flare was ok, just the nut was stripped but i just did it up with vice grips
so its all good now

mat

 

[khubner1]

seems like about now is when the factory stock ones are letting go i only just did mine a few weeks ago