RVR HSG front caliper pads & rotors same as evo 1 2 3?

[RVRHSG]

Can anyone confirm HSG front brake pads and rotors are same as the evo 1-3?

I'm aware the Evo 1-3 front rotors is 4 x 114.3 pattern and HSG has 5 x 114.3 pattern. I'll be using the HSG calipers and rotors in my proton gti. I need a new pads and set of front rotors to have it redrill to 4 x 100.

-So far I've checked the HSG front rotors have the following 275mm diameter rotor, 23mm thickness, and 69mm CB.
-Front caliper ear mount measurement center hole to center hole approx 127mm (it bolted onto my proton gti).

Wae.

 

[Benzo4gT]

As for the pads being the same AFAIK they should be, the calipers in an E3 and HSG are the same except the E3 has a banjo bolt hose connection and the HSG has a

regular angled hose input. You should be able to get pads at S cheap, won't be race pads or anything flash though.

Rotors ↓↓↓

http://www.ebay.com.au/itm/FRONT-PAIR-SLOTTED-DISC-BRAKE-ROTORS-MITSUBISHI-RVR-276MM-DIA-1994-1997-/221307848851?hash=item3386f9c893:g:sQoAAOSw65FXssCZ

 

[RVRHSG]

Thanks Benzo. There are crap loads of different branded pads. DB1223. Any pads recommended for light tracking?

 

[evo-gsr]

Check out QFM....top quality pads reasonable prices and near to nothing dust.

 

[RVRHSG]

Checked QFM site return with the following part no NDB1223. It look like is not available in A1RM range. http://qfm.com.au/page/6/Performance_Range

HPX for $79.00 does it sound reasonable? I can't else where sell them. http://brakesdirect.com.au/aus/qfm-db1223hpx-brake-pads.html

 

[evo-gsr]

You wont be dissatisfied with the HPX range.

 

[RVRHSG]

I got in touch with Brakes Direct - A1RM is available here
http://brakesdirect.com.au/aus/db1223a1rm-qfm-a1rm-brake-pads.html

I'll try out the a1rm pads instead.

Further updates: Brakes Direct saidthe 1223 pads only fit EVO 4-9 fitted with the RS calipers after I did further inquiry.

So does anyone have the actual qfm hpx/a1rm part number for evo 1-3 calipers

 

[EV0300]

Rs calipers are twin pots its the same 1-3

 

[RVRHSG]

Got it now... The rs are non brembo.

 

[evo-gsr]

A1RM would be overkill for a Proton wouldnt they?

 

[EV0300]

Never have too much braking performance

 

[RVRHSG]

No harm giving it a try... the current single pot is terrible hence moving toward twin pots.

 

[evo-gsr]

I was referring to the pad choice that will kill the rotors real fast mate.