Steering wheels.

[BZY247]

Hey guys,

Starting to get sick of my current steering wheel.
Was wondering if any other year evolution wheels have been known to fit ?

 

[EVOCPE]

Any EVO1/2/3 witll fit but you will need a boss kit, also you can fit an EVO4/5/6 RS NON ABS wheel

The EVO4/5/6 ABS wheels will NOT fit

 

[Gianni]

I have a mint gsr wheel for sale

 

[Atters_del]

Got any tips for taking the stock GSR steering wheel off?

 

[Gianni]

Undo the centre bolt 17mm from memory. Could be 19mm
Then lots of wd40 and with a mallet tap around the wheel forward and back and occasionally yank the wheel till it comes loose

 

[Atters_del]

Undo the centre bolt 17mm from memory. Could be 19mm
Then lots of wd40 and with a mallet tap around the wheel forward and back and occasionally yank the wheel till it comes loose

Sweet... I never changed it of fear from breaking the original horn cover

 

[4piknup]

Don't remove the nut completely, just loosen it. cause then you won't break your nose when it comes off.
Just wrestle it, pushing and pulling on opposite sides of the wheel at same time, then top and bottom. it will.be tight but it will come. do not hit the centre shaft.

I have been known to put feet on the dash for extra pizaz (older more robust vehicles)
Send me a picture of your nose after you get it off, so that i know you are listening

 

[khubner1]

loosen the nut /take it off then put it back on 1-2 turns. then yank on the wheel as hard as you can with all your weight and thank me when you still have all your teeth after it lets go because you left the nut on there to stop it smacking you in the face.

 

[Gianni]

^ oh yeah that too.

 

[ENGINR]

Don't yank on the wheel. When you've taken the centre nut off, get your socket wrench and wrap a rag/cloth around it and use it to gently tap the back of the wheel. If you gently tap the left side then right side then left side then right side (you get the picture!!) it'll wiggle itself up the splines and come off easy as pie.

 

[romeo]

anyone know if a wrx wheel would fit they seem to be alot cheaper and easier to find then a non srs evo one
http://www.ebay.com.au/itm/JDM-SUBARU-IMPREZA-WRX-STI-GF6-GF8-NARDI-STEERING-WHEEL-RARE-ITEM-OEM-/190801469919?pt=Motors_Car_Truck_Parts_Accessories&hash=item2c6ca761df

 

[evopwr]

J spec GSR / Evo 1-2 is what you want! Simple & effective!

 

[EVOCPE]

Also to fit these steering wheels, you will need to purchase a 4Gtuner shirt

Having that shirt on while doing it makes the job a whole lot easier and more enjoyable

http://www.4gtuner.com/topic/22108-4gtuner-polo-shirts-are-in-the-store/

 

[captainTeeBag]

J spec GSR / Evo 1-2 is what you want! Simple & effective!

Please tell me where I can find a genuine Evo 2 wheel mate as I've been looking for one for fkn ages

 

[evo-gsr]

See my Sig....They aren't cheap but.

 

[captainTeeBag]

See my Sig....They aren't cheap but.

Soz mate my sig means nothing to me ???

 

[4piknup]

He likes scallops, cake and pies.

Will swap for steering wheel

 

[EVOCPE]

Soz mate my sig means nothing to me ???

His SIGNATURE, its on the bottom of every single 1 of his posts

PM me, for any GENUINE, parts needs, direct from Japan

 

[4piknup]

Pm means pork meat, that's the type of cake he likes

 

[captainTeeBag]

How about a pork meat cake made in the shape of a pie with scallops around the top. For an Evo 2 wheel I'd happily cook that and deliver it.