So ive set myself a goal by the end of this year or realistically the end of next year, but im gonna do 10sec in the RVR. This thread will be asking silly and legitimate question on how to obtain this, and whether or not its feasably possible.
Firstly and most importantly, this will be street registered, and will be H pattern.
Im hoping the following wil be enough with some 60ft practice to obtain this tall goal.
Ive acquired a forged motor from Baz. Should handle 30psi fine. Itll get 272 cams i have, springs/retainers, gears, 80mm TB/intake. Im not too sure what injectors ill need to handle 30, id imagine 1600/2000 for E85 (or possibly 2x 1000 sets??) I dont think my GTP 20g will get enough power in top end to get the mph, so ill probably need a bigger turbo. What are peoples experiences with 6boost manifolds? Worth the money? That coupled with a GTP712/3076 etc id hope will be enough. Got a haltech to control it all.
Ive got my eye on a fidanza lightened fly and a ceramic 6 puk racing clutch. Im gonna send a box to get inspected/clearances done suitable to the power ill have to hopefully not break it but will see.
Is what im rattling off here realistically gonna get me to this goal or am i having to go bigger and more aggressive? I can take out the rear seat and the carrier/rear bar rheo etc all the heavy shit is already off the car but will be essentially full trim otherwise i dont think there is a substantial amount of weight in the plastic trims and carpet to warrant pulling them out is there?
Whether you want to laugh at me, cheer me on or tell me im a loopy kent feel free. Just trying to get an idea of what power i need and what else has to be done. Any advice/input from those who have heavily modified theirs/know what it takes to run 10s please let me know.
I imagine this thread is gonna get a bit messy so ive separated it from my build thread.
Firstly and most importantly, this will be street registered, and will be H pattern.
Im hoping the following wil be enough with some 60ft practice to obtain this tall goal.
Ive acquired a forged motor from Baz. Should handle 30psi fine. Itll get 272 cams i have, springs/retainers, gears, 80mm TB/intake. Im not too sure what injectors ill need to handle 30, id imagine 1600/2000 for E85 (or possibly 2x 1000 sets??) I dont think my GTP 20g will get enough power in top end to get the mph, so ill probably need a bigger turbo. What are peoples experiences with 6boost manifolds? Worth the money? That coupled with a GTP712/3076 etc id hope will be enough. Got a haltech to control it all.
Ive got my eye on a fidanza lightened fly and a ceramic 6 puk racing clutch. Im gonna send a box to get inspected/clearances done suitable to the power ill have to hopefully not break it but will see.
Is what im rattling off here realistically gonna get me to this goal or am i having to go bigger and more aggressive? I can take out the rear seat and the carrier/rear bar rheo etc all the heavy shit is already off the car but will be essentially full trim otherwise i dont think there is a substantial amount of weight in the plastic trims and carpet to warrant pulling them out is there?
Whether you want to laugh at me, cheer me on or tell me im a loopy kent feel free. Just trying to get an idea of what power i need and what else has to be done. Any advice/input from those who have heavily modified theirs/know what it takes to run 10s please let me know.
I imagine this thread is gonna get a bit messy so ive separated it from my build thread.
