Tranfer Case OIL CHANGE how to ??? emergycency!

[langsr]

Hey,

in a spot of bother, i am ever blind or cant see the bolt to re-fill the tranfer case on lancer gsr.. Does anyone know where the bolt is to re-fill the tranfer case. The large bolt on the bottom is to let the oil out, but cant see any other bolts.

thanks

 

[Richard]

There is another bolt on the side, is about the same size, 23/24mm I'm pretty sure, just fill to this, it only takes fu(k all oil.

 

[mimmo_gsr]

Hey Langsr,

If you look in this photo you can see the filler hole:

If you look at the holes marked with the number 1, you will see that black bracket. Now I am pretty sure you need to undo that bracket in order to get to the filler bolt which is behind it, as its fairly cramped when on the car to get a spanner in there.

The filler bolt in next to leftmost hole near the bottom marked '1'....if that makes sense??

Let me know if you need a better explanation :?

Mimmo

 

[langsr]

was easy to get to, just didnt see it due to all the dirt and the bolt been black made it hard!

 

[JSTYLE]

There is another bolt on the side, is about the same size, 23/24mm I'm pretty sure, just fill to this, it only takes fu(k all oil.

17mm

Jon

 

[PROGSR]

17mm

Jon

Just like I SMS'd you Chris, "17MM" at the front of the Transfer case... the centre bolt... just fill the oil until it starts coming out.... only takes 0.5L...

 

[Richard]

There is another bolt on the side, is about the same size, 23/24mm I'm pretty sure, just fill to this, it only takes fu(k all oil.

17mm

Jon

yeah I did mine a couple of years ago, most diff's and gearboxes that I do all have 23mm for the inspection/fill hole and 24mm for the drainplug