URGENT_Need wiring information_URGENT

[adamgsr]

Hey guys

Im running an after market evo 7,8,9 throttle body in my 6.5
I have just recently found out that the connectors on my loom is a different connector on the 7 idle control valve

So what i need to know is, which wires do i connect to which wire if i use the connector form an evo 7 loom to an evo 6 loom???

Really in need of this information asap!!!

Thanks guys

 

[bazeng]

You could use either plug. It depends what your have available. I'd use the stock plug on your current loom and modify the tb plug myself. Have you checked if the color codes match on the tps? You might be lucky and just match the colors but to be safe I would grab the multimetre and do some measuring. Tps's have a 5v / signal to ecu / gnd.