Valve cover washers

[4piknup]

Mine are flat and weeping oil, and new ones weren't in my gasket kit.
Anyone have a link to some that are correct, or a part number.
Thank y'all.

 

[4piknup]

Hyundai part numbers...
Valve cover gasket(1)22441-33020
Inner sparkplug gasket(4)22443-33020
Outer stud(8)22448-33020
Inner stud(6)22448-33120
Rubber grommet/washer(14)22452-33021
Nut(14)22450-33020

But the Hyundai use studs and pretty dome nuts.
I will try these numbers at the stealership tomoz.

 

[bazeng]

Hey Jack, i don't think that these work on the Mitsubishi valve cover.

The holes are too small in diametre as the stud Base is thicker than the thread that the nut goes on. So hyundai, bigger holes, mitsubishi, smaller holes.

It means the gasket won't fit.

BUT.... Washers might...
I've got some I can try for you...

 

[4piknup]

Oops then. Pretty sure it was a mitsi gasket that went on. It was a little tight, its not leaking now though. Just the washers on the plug holes.
The part numbers posted suggest studs and acorn nuts on the plug holes, I don't have then there, I have bolts.
Anyway, I will check the Hyundai out.

It is a Hyundai engine that I have, so a Hyundai cover.

 

[4piknup]

$4 ish each. Washer, or stud, or nut. Washers are in Australia, studs and nuts in korea

 

[Miniman_alis]

Jack

imageshack.com/img633/7882/ODKDkE.jpg

Sent from my SM-G920I using Tapatalk

 

[evo-gsr]

$4 ish each. Washer, or stud, or nut. Washers are in Australia, studs and nuts in korea

Plenty of nuts in North Korea atm.

 

[4piknup]

Thanks Mr. Mini
So mitsi number is md327253
Would work out to be $2.90 each for 14 of them through partsouq.

https://partsouq.com/en/search/search?q=MD327253&qty=14

 

[Miniman_alis]

Amayama have them in uae for $1.96ea

Sent from my SM-G920I using Tapatalk