hi guys my radiator fan and my ac fan have both died in my aspec 91 vr4
i also had a second hand vr4 radiator fan fitted but the shop fitted a dead fan, car was in the shop for 6 days
and no body checked if the fan worked before charging me and sending me on my way home to overheat 20mins from the shop - thanks for that!!
anyway basically the bushes in both the radiator fans are dead, the fan runs for about 10secs then stops.
i have swapped all the resistors, relays and fuses related to the ac and fans
i have also tried the cooling fan relay bypass with a direct wire at the fuse box to a switch as per VFAQ but no luck
it just makes a click noise and no fans turn on.
http://www.vfaq.com/mods/wayback/1gcoolingfan.html
i cant find anyone with a vr4 ac or radiator fan forsale so im now going the aftermarket path
can anybody recommend a replacement make and model that will fit with out to much hassle?
also can i just splice the wires from the old fans so the ac and radiator fans can operate as the stock fans were intended or do i have to
run both off a separate non stock related switch?
appreciate any help
thanks,
nate.
i also had a second hand vr4 radiator fan fitted but the shop fitted a dead fan, car was in the shop for 6 days
and no body checked if the fan worked before charging me and sending me on my way home to overheat 20mins from the shop - thanks for that!!
anyway basically the bushes in both the radiator fans are dead, the fan runs for about 10secs then stops.
i have swapped all the resistors, relays and fuses related to the ac and fans
i have also tried the cooling fan relay bypass with a direct wire at the fuse box to a switch as per VFAQ but no luck
it just makes a click noise and no fans turn on.
http://www.vfaq.com/mods/wayback/1gcoolingfan.html
i cant find anyone with a vr4 ac or radiator fan forsale so im now going the aftermarket path
can anybody recommend a replacement make and model that will fit with out to much hassle?
also can i just splice the wires from the old fans so the ac and radiator fans can operate as the stock fans were intended or do i have to
run both off a separate non stock related switch?
appreciate any help
thanks,
nate.