VR4 engine parts, wheels, injectors, turbo, gate, manifolds, recaros, performance parts.

4GTuner

Help Support 4GTuner:

MrSparkle

Donating Members
Joined
Mar 6, 2011
Messages
12
Location
Perth, WA
Happy to post interstate. We can work out shipping and stuff when you get in touch with me.


gt35r .6 rear - less than 1000km's old great condition. Got lines and fittings and a dump pipe if you want it too.
$1200ono

tial 44mm gate - less than 1000km's old great condition. Red , fitted with 10 psi blue spring and 7psi red spring, v band mount. Comes with screamer pipe you may or may not be able to use.
$500

Drifttek wheels - 16x8 114.3x4 +10 offset. Suit a silvia pretty sweet. White and 6 spoke. Got tyres 245.50 / 225.50 At least 80% on all tyres
$700

Recaro seats out of a proton gti. Pretty comfy seats with rails to suit starion. Fair condition no rips or tears but the recaro writing bit has faded. (Isn't very hard to mod to suit other stuff since no one in their right mind would own a starion)
$200

VR4 4g63b parts -

HAVENT PULLED THIS APART YET!!! - hks 272 cams inlet and exhaust - these were second hand when installed but still show no wear marks, done very little work in this engine not sure about the last one.
$300

- hks cam gears inlet and exhaust - these were new when installed done very little work basically used for tuning and a few drag races at the plex. $250

- clear cam gear cover.
$100 <---All these parts can be had including one vr4 engine( good runner with cams cam gears greddy timing belt and clear cam gear cover. Would prefer this over ripping it apart atm. cam cover to sump- minus manifolds for $1000

-cp pistons - new in box need to check specs just pm me if keen.
$400

- cometic head gasket - new in box also
$100

- Mircotech lt8s - x4 box , aftermarket coils for 4g63 sit in the valley like an sr set up. wiring to suit vr4 engine in starion. all plugs and stuff like that.
$650

- Hypertune intake plenum with hypertune throttle body made to suit a vr4 rwd set up engine (north/south)
$1300 (cost$2500)

EDIT :

-680cc injectors , i think they were hks ones but im not sure.
$400

-AEM fuel rail , blue , suits anything up to evo4 i think.
$300

-Sard FPR with gauge , blue , multifit (hose connections either end)
$150

There is more to come but the list will have to sit like this. Some of this stuff is out of the car and some isn't. Pics to come or if you can't wait sms me and I will take some for you.

All prices are negotiable ( within reason ) and if you buy more stuff then we can do deals

Got lots of starion bits too like new d2 coilovers+ wilkinson coilovers and a wilwood brake kit so might suit sigmas or something along those lines. PM me for details.
 
one on the right but in red.

http://supraforums.com/forum/showthread.php?589475-New-Tial-44mm-wastegate

still ripping car apart atm so no new pics yet
 
Thats a lot of gear you have for sale mate.

Seeing as you are over in Perth and a brand new member with your first post in the forsale section are there any members over there that can vouch for you?

Or perhaps someone like Brian (bmgtz) could pick up any items that people want to buy and the funds could go through him. ( I'm sure the admin team would prefer this too )

No offense intended but we have had issues with one particular member over there in the past and now it's a case of better safe than sorry.
 
Thats a lot of gear you have for sale mate.

Seeing as you are over in Perth and a brand new member with your first post in the forsale section are there any members over there that can vouch for you?

Or perhaps someone like Brian (bmgtz) could pick up any items that people want to buy and the funds could go through him. ( I'm sure the admin team would prefer this too )

No offense intended but we have had issues with one particular member over there in the past and now it's a case of better safe than sorry.


Hey Tim,

I have spoken to Shane and whilst I don't know him....he is happy for for me to check the gear out for potential buyers.
 
on behalf of Ken and subject to inspection

i will pay for and collect the commetic gasket and the sard reg.

second dibs registered on cams.....if the first guy doesn't get them.

just as a precaution and to follow forum etiquette......if you send an sms to Shane or I directly, let other users know your item of interest with a post here.
 
Thats a lot of gear you have for sale mate.

Seeing as you are over in Perth and a brand new member with your first post in the forsale section are there any members over there that can vouch for you?

Or perhaps someone like Brian (bmgtz) could pick up any items that people want to buy and the funds could go through him. ( I'm sure the admin team would prefer this too )

No offense intended but we have had issues with one particular member over there in the past and now it's a case of better safe than sorry.


he is my brother and all the stuff he has for sale was eather on my old starion or for it.
 
As I said in my previous post, no offense intended to Shane.
Just a precaution mainly due to distance.

Big thanks to Brian for working with Shane to get things moving smoothly.

Thanks guys.
 
No offense taken dude i understand its a lot of money to be sending off into cyber space.

Will get the pics and specs for the stuff over the next day or so and then everyone will have a better idea of what ive got etc etc.
Brian said on the phone he is keen to come and have a squizz so that might be beneficial to anyone wanting to know more about
certain parts. If anyone wants any more info and i dont know it please ask and i will find it out for you. My weekend has consisted
of tearing the car apart so the thread is pretty brief so ill do my best to update that for everyone too.

Cheers :p



Uploaded with ImageShack.us



Uploaded with ImageShack.us



Uploaded with ImageShack.us



Uploaded with ImageShack.us



Uploaded with ImageShack.us



Uploaded with ImageShack.us



Uploaded with ImageShack.us



Uploaded with ImageShack.us



Uploaded with ImageShack.us



Uploaded with ImageShack.us
 
damn so many good parts,so little cash!

Good luck with the sale im sure you will have no dramas moving it.

Whats Glen doing now with no starion?
 
I'll definately take the cam pulleys if they fit an Evo 3 (?)
Any idea if the willwoods bolt directly to an Evo 3?
 
Glen's got a NA model mx5 and took to the whole stance thing in a big way, you have probably seen pictures of it. ;)

(white , cage , stretched tyres, tiny wheels. )



Cam gears would probably fit man but atm the engine is staying in one piece. I am trying to sell it complete for $1000


Doubt the wilwoods would bolt directly onto your evo 3. But they didnt bolt to a starion either and they just made an adapter plate to make them kit. They are awesome calipers. Super light too.


UPDATE : Radiator sold, big diff sold, front bumper sold, strut braces sold, Dash sold.
 
Glen's got a NA model mx5 and took to the whole stance thing in a big way, you have probably seen pictures of it. ;)

(white , cage , stretched tyres, tiny wheels. )



Cam gears would probably fit man but atm the engine is staying in one piece. I am trying to sell it complete for $1000


Doubt the wilwoods would bolt directly onto your evo 3. But they didnt bolt to a starion either and they just made an adapter plate to make them kit. They are awesome calipers. Super light too.


UPDATE : Radiator sold, big diff sold, front bumper sold, strut braces sold, Dash sold.


Is the thermostat housing setup for sale? How much.
 
Turbo,gate,ex manifold, intake manifold, all the related stuff is pending.

Wheels sold, microtech sold coilovers sold, seats sold.
 
Alright ladies

PRICE DROP TIME :

- Entire engine Includes vr4 engine, sump to cam cover, big port head, 6 bolt etc etc plus HKS 272 cams , HKS cam gears , GREDDY timing belt and clear cam gear cover for $800 (Not seperating)

- 680cc HKS injectors $300

- AEM fuel rail $250

- GENUINE SARD fpr with gauge still $150 (but its definatly genuine for all you haters out there.)

- CP pistons are sc7200 $300

- Cometic gasket is 1.9-2mm thick with 86.5mm bore $100 - comes with a engine gasket/seal kit. Only thing i have used was rear main and exhaust manifold gasket out of this kit even got a normal head gasket too.
 

Latest posts

Back
Top