VR4 motor ADDED!!, DTM rush wheels, GTO brakes package FS

4GTuner

Help Support 4GTuner:

RicKii``

Well-Known Member
Joined
Jul 10, 2005
Messages
631
Location
Melbourne
DTM rush wheels and GTO brakes package FS

***im selling my beloved wheels which have not even seen 200kms of driving so the tread is like brand new.

DTM rush wheels, gold with a polished lip to fit later evo's offset.
18x8.5inch, +29 offset
3 wheels are perfect, one wheel has a marking on the spoke
225/35/18 ns/2 tyres with 99% tread

$1000 no tyres
$1400 with tyres


***also i have GTO front brake setup. it was put on by the mechanic and he was complaining how the GTO bracket thread was tight and tough.
anyway, 4pot calipers with pads and 320mm rotors.
calipers, brackets, rotors and pads, brake lines. also i recall the rotors have drill holes to fit 4x100 aswell. but these calipers are huge so the right spoked wheels will be required.
$600
pics below is what it looks like compared to 2pots and the other pic is behind a 17inch wheel 4stud. needed a 20mm spacer to fit.
now they are behind the gold wheels above with no spacer and 5 stud.


***my motor is up for sale 4g63t
its bit of a hybrid, Darren from ASAF built it and installed it. VR4 bottom end because its a 6bolt but we believe its has a evo head as it has the evo intake on it. Jerome and i think so. anyway it has a new headgasket put in and all cylinders are around 130psi.
510cc injectors, has been cleaned
evo intake manifold
td05 16g evo 1 turbo still boosting hard
timing belt changed when headgasket was done
no aircon compressor
looking for $1600 for it

might be willing to part if i get majority of parts gone.

***evo 1 gearbox, just a standard box, no LSD. has been rebuilt by techsport last year. hardly seen any driving $1200
***evo oil cooler and lines, the brackets have been removed, i have them somewhere $150
***evo afm with 3inch adaptor and pod filter $100

genuine "evolution V" side door stickers, pair $40
CC mirage radiator, single core from mivec mirage(looks same as CC glxi) $30
VR4 waterpump, BNIB $50
CC/CE "bulge" side indicator orange, pair $10
CC/CE "flat" JDM spec y0 side indicator orange, pair + 1 spare $20
4x100 space saver wheel $20
CE illumination adjuster $10
stick on vents, gag gift prehaps? $10
UFO dome light, blue flouro round tube $10
CH lancer stock tail lights, pair $60
2inch twin gauge holder $10
Mivec fuel pump, same size as the stock GSR from what i was told $20
stock muffler from unknown $10
evo 3 top rear arms $20
stock mivec 4g92 air box $20
cc cup holders $20
CC GSR black centre glove box top lid $20

2x projector light assembly, perfect for retro fitting into your own headlights
includes projectors, and high beam headlamps $100

postage extra
pick up from south east melbourne
 

Attachments

  • dtmrushgolduv9.jpg
    dtmrushgolduv9.jpg
    21.1 KB
  • DSC00401.jpg
    DSC00401.jpg
    16.4 KB
  • IMG_1818.jpg
    IMG_1818.jpg
    21.3 KB
  • IMG_1820.jpg
    IMG_1820.jpg
    24 KB
Hi Ricki, hmmm a bit of a mismatch if you've got 4x114.3 stud pattern as you wouldnt redrill those rotors again to suit GSR/EVO :(
What did your mechanic mean by 'bracket thread was tight and tough?' is the thread still alright in the brackets? And do you have a pic of them?
 
hey rob, i left the car with him to put it all together and he was complaining how the thread was tight and stuff...when he said it, i took a look at all the bolts to make sure everything was ok and its all good. also i dont have a pic of the brackets, but i got it from a guy on the forums, his name is micheal and i picked them up from braybrook in melbourne. thick high quality steel.

also to everyone, the wheels are ONO, perfect fitment for an evo4-10
 
Brake upgrade consists of calipers, mounting bracket and rotors? (I may not require the rotors though)
Will brake upgrade bolt directly onto Evo 3? Postage to Perth? (6061)
I have 16" OZ rims with the widest offset possible to fit under the guards so they should clear (fingers crossed)
 
yes it will bolt directly as this used to be on a CC cyborg (same shape as CC Evos). ONPSI; Ricki said he redrilled the rotors to suit his stud pattern.
 
yer rickkii bought the braket from me when i was working at a Performance shop in footscrazy.. its made out 10mm mild steel..
if u cant sell it rickkii let me know as i have a few ppl waitin for a few sets.. as i cant get my hands on my template.. :angry:
 

Latest posts

Back
Top