Wanted to swap - GT35 .82 rear housing for 1.09 rear housing

[bazeng]

Hi guys!

If anybody knows of a 1.09 rear housing to suit a GT35, I am interested to swap for a .82 housing (ceramic coated).

I know what-lag sold a GT35 with a 1.06 but I'm not sure if it is the same. Ideally measurements would be ideal!

Let me know what you have!

 

[boost_lover]

If you desperately need one, what about the xr6 forums? They have the housing you want, but you have to weld the internal gate up.

 

[cheeks]

Hi Baz

You still looking for this swap? If so, I am interested. I have a 1.06 rear.

Mark

Hi guys!

If anybody knows of a 1.09 rear housing to suit a GT35, I am interested to swap for a .82 housing (ceramic coated).

I know what-lag sold a GT35 with a 1.06 but I'm not sure if it is the same. Ideally measurements would be ideal!

Let me know what you have!

 

[bazeng]

Mark,

I'll swap champ...

when does it suit you?

I'll be taking the VR4 for another blat soon then I'll take it off the road to finish it fully.

 

[JC evo1]

keep the .82 Baz! Might be better on a 2.4 but its a terrible match on a 2L.

 

[boost_lover]

I dont know about that. All depends on the car setup.

 

[cheeks]

I'm good anytime. The 1.06 rear was on my car but the motor had an issue before I could even run it in. It hasn't seen any boost so far so is as good as new. It is bog standard. I just have to take it off the back of the turbo. I will post up pics if you like.

M.

 

[bazeng]

I'm good anytime. The 1.06 rear was on my car but the motor had an issue before I could even run it in. It hasn't seen any boost so far so is as good as new. It is bog standard. I just have to take it off the back of the turbo. I will post up pics if you like.

M.

Perfect.

Done deal.
Is you turbo a GCG 3582r? if so, should be a perfect swap. Mine is simply an off the shelf turbo from GCG also.

If you can pm me your contact details, I'll call you as soon as I can.
Also just confirming, is it a 4 bolt flange?

 

[cheeks]

Ok. The turbo is a GT3582R. The serial number off the turbo is: GJ 6089J 706451-5005. The cast serial numbers off the exhaust housing are: 262M 73117203. Bought it off turbo logic as an off the shelf item. It has a 4 bolt flange. Ring me on: 0409626307

M