Wheel+housing

[JAP63]

Any benefit in throwing on a big 16G rear wheel and 7 cm housing onto my 14B?

wouldnt have as much outright flow as compared to a E3 16G would it?

 

[JAP63]

Any benefit in throwing on a big 16G rear wheel and 7 cm housing onto my 14B?

wouldnt have as much outright flow as compared to a E3 16G would it?

 

[JAP63]

Any benefit in throwing on a big 16G rear wheel and 7 cm housing onto my 14B?

wouldnt have as much outright flow as compared to a E3 16G would it?

 

[GVR40]

don't think there would be much benefit, the compressor wheel is still the same size and can only put out so much air before it runs out of its efficiency

 

[GVR40]

don't think there would be much benefit, the compressor wheel is still the same size and can only put out so much air before it runs out of its efficiency

 

[GVR40]

don't think there would be much benefit, the compressor wheel is still the same size and can only put out so much air before it runs out of its efficiency

 

[rob323]

The exhaust wheels on a 14B and a 16G (big and small) are EXACTLY the same. The exhaust housing will give you slightly less back pressure but does not give any noticable power increase.

 

[rob323]

The exhaust wheels on a 14B and a 16G (big and small) are EXACTLY the same. The exhaust housing will give you slightly less back pressure but does not give any noticable power increase.

 

[rob323]

The exhaust wheels on a 14B and a 16G (big and small) are EXACTLY the same. The exhaust housing will give you slightly less back pressure but does not give any noticable power increase.

 

[JAP63]

Any benefit in throwing on a big 16G rear wheel and 7 cm housing onto my 14B?

wouldnt have as much outright flow as compared to a E3 16G would it?

sorry i meant Front wheel....
would it just turn into a 16G?

 

[JAP63]

Any benefit in throwing on a big 16G rear wheel and 7 cm housing onto my 14B?

wouldnt have as much outright flow as compared to a E3 16G would it?

sorry i meant Front wheel....
would it just turn into a 16G?

 

[JAP63]

Any benefit in throwing on a big 16G rear wheel and 7 cm housing onto my 14B?

wouldnt have as much outright flow as compared to a E3 16G would it?

sorry i meant Front wheel....
would it just turn into a 16G?

 

[brisvr4]

Yes it would just turn into a b16g Jamie

 

[brisvr4]

Yes it would just turn into a b16g Jamie

 

[brisvr4]

Yes it would just turn into a b16g Jamie

 

[VR-4Squid]

you'll have to machine the hell out of the comp cover to make it fit tho (if it will fit at all) the 16G wheel is MUCH bigger (I have a big16G and a 14b sitting in my garage).

Much better option would be to track down a comp cover from a 16g turbo and use that as well.

 

[VR-4Squid]

you'll have to machine the hell out of the comp cover to make it fit tho (if it will fit at all) the 16G wheel is MUCH bigger (I have a big16G and a 14b sitting in my garage).

Much better option would be to track down a comp cover from a 16g turbo and use that as well.

 

[VR-4Squid]

you'll have to machine the hell out of the comp cover to make it fit tho (if it will fit at all) the 16G wheel is MUCH bigger (I have a big16G and a 14b sitting in my garage).

Much better option would be to track down a comp cover from a 16g turbo and use that as well.

 

[brisvr4]

You also can't just drop a 16g wheel in there as the back of each wheel is different!
Below is a shot of both wheels, 14b is on the left, note the differences.

 

[brisvr4]

You also can't just drop a 16g wheel in there as the back of each wheel is different!
Below is a shot of both wheels, 14b is on the left, note the differences.