Dave_GSR1.8
Well-Known Member
Ok, so I have just installed a short shifter on my CC GSR, which I bought back in June, much better, really shortened the sideways movement, (lengthened lever arm) but back and forth has only been shortened because the stick is shorter. What I would really like to have is my nice new shortened sideways throw with a similar amount of shortening on the back and forth throw with a standard length stick (which means a raised pivot point).
So I have gone back through all the old threads on short shifters and come up with two possibilties for units that are still listing, these being:
Shifteaz @ http://www.shifterz.co.nz/index.php?route=product/category&path=76_88
or
X Racing Motorsport @ http://xracing.com.au/body-styling/mitsubishi/mitsubishi-lancer-cc-4dr-1992-1996-short-throw-shifter/
Does anyone have any experience (good or bad) with either of these ?
The other thing I could do is just raise the base plate 20 to 30 mm (to raise the top of the stick to the OE position), has anyone done this under the standard console ?
So I have gone back through all the old threads on short shifters and come up with two possibilties for units that are still listing, these being:
Shifteaz @ http://www.shifterz.co.nz/index.php?route=product/category&path=76_88
or
X Racing Motorsport @ http://xracing.com.au/body-styling/mitsubishi/mitsubishi-lancer-cc-4dr-1992-1996-short-throw-shifter/
Does anyone have any experience (good or bad) with either of these ?
The other thing I could do is just raise the base plate 20 to 30 mm (to raise the top of the stick to the OE position), has anyone done this under the standard console ?
