Will evo 1-3 j-pipe (or "turbo outlet pipe"). Fit vr4?

[milkandoj]

Hi ive got a 16g and im pretty sure i lust bolted on the vr4 j-pipe.And works fine. But....

Do the evo 1-3 pipes also work or is the route not correct. Don't they go to the passenger side rather then over the exhaust manifold.

Can you turn them around so they go over the exhaust manifold or is than angle all wrong?

 

[brettu26]

i reckon the evo ones will not work unless you are using evo cooler & pipework.

rotating evo j-pipe 180deg will have it pointing back over/fouling the rocker cover

 

[BMGTZ]

when we went to put a vr4 turbo on a gsr recently we had to mod the vr4 j pipe to fit because it pointed the wrong way.......gsr and evo point the same direction.

 

[ted]

you wont be able to spin it 180 anyway the bolt holes are offset on the bolt up i believe

 

[milkandoj]

Ok cheers guys. I though for some reason i might be able to turn them around.

Its just i found and aftermarket evo 1-3 turbo outlet. Wanted to see if i could use it.

It could be cut off and turned around but he offset holes may make it not work.

Could have a crack at making one myself later, use a flange, a flare and then a 90 degree bend.