wiring the evo maf....

[MADVR4]

has any1 done it without using a connector plug??

could some1 give me a wiring diagram that would be great

so i can just run wires to the maf.... so Green/white goes to pin 1 etc


cheers lads

 

[WRCVR4]

www.vfaq.com :wink:

 

[MADVR4]

does any1 know what to do with the vaccum line that runs from the actuator??? should i block it off or T piece it into some where else... the evo maf has no hole for it

 

[SIVART]

I used the magna maf pipe

fitted 3 lines into a bottle lid and slid the lid into the side hole on the pipe

plus I fitted the plumb back pipe on the top hole

 

[MADVR4]

hmmmmm i dont have a hole like that in my piping..... its custom off the turbo... i have a plug for the pipe that comes off the rocker cover near the top radiator hose!!!!


there is another one that went into the old maf... and that vacum line from the actuator.... if i put the actuator line onto another vacumm line some in there will that work??? and the old pipe that went to the maf i can block off....

will that work?
grant-

 

[SIVART]

Im not 100% but its sound like it should