Connor
Donating Members
Hey guys,
I have decided to part out my RVR after the timing belt skipped some teeth on the driveway one morning.
Here is a run down of the car:
17xxxxkm's
td05 16g
3" turbo back with divorce pipe for the wastegate
Head rebuilt with 8 new valves, 8 new brass guides, valve stem seals, 3mm hole lifters... I will have to check for damage.
Exedy HD clutch with 433km's on it
ARP head studs
Cometic MLS head gasket
New CAS
Evo 8 enkei rims x5.
Here is a list of parts and rough prices,
Exedy HD clutch with 433km's on it - $250
Evo X bilsteins, front set has been slightly modified to work with the RVR top hat - the rear require drilling or cutting off the bottom mount and welding the RVR mount on - $400- Front set SOLD
Evo VII Enkei's x5 $600, A bit of rash on some but nothing extreme. The 5th one is awesome condition.
Stock RVR wheels x5 - $150 two tyres are at about 95% and the others around 60-70%
ARP head studs, $50 they were only torqued down the once. SOLD
TDO5 16g + stock manifold - $200 I am not a expert with turbos, but it seems to have stuff all shaft play. The only downside is a stud is snapped in the exhaust housing. SOLD Pending payment
Rebuilt head - 8x new valves, 8x new guides, new valve stem seals, decked, acid bathed, 3mm lifters. Price will depend on whether it is damaged or not. SOLD
Ferrea titanium valve spring retainers to suit evo 1-7 - $80 -NEW
EVO 9 beehive valve springs - $30 -USED
New set of viton valve stem seals - $15 SOLD
Euroexport valve spring remover tool - $60 This thing is awesome and made specifically for the 4G63 engine. - USED SOLD
EVO VI brake master cylinder to suit Brembo conversion - $150
Rear KYB shocks from a nimbus, less than a 1000km's - $50
Engine Block - 17XXXXkm's, pistons have a couple of valve strikes on them and might need rings but apart from that it was perfect - $??? SOLD
Transfer case - no noticeable noises that I heard - $???
Gearbox- 17XXXXkm's 2nd gear synchro a bit funny when cold. $???
New middle driveshaft bearing and carrier, it is from a GVR4 but was told it fits the RVR - $40
Photos to come tomorrow, hopefully.
Contact via PM
Cheers,
Connor
I have decided to part out my RVR after the timing belt skipped some teeth on the driveway one morning.
Here is a run down of the car:
17xxxxkm's
td05 16g
3" turbo back with divorce pipe for the wastegate
Head rebuilt with 8 new valves, 8 new brass guides, valve stem seals, 3mm hole lifters... I will have to check for damage.
Exedy HD clutch with 433km's on it
ARP head studs
Cometic MLS head gasket
New CAS
Evo 8 enkei rims x5.
Here is a list of parts and rough prices,
Exedy HD clutch with 433km's on it - $250
Evo VII Enkei's x5 $600, A bit of rash on some but nothing extreme. The 5th one is awesome condition.
Stock RVR wheels x5 - $150 two tyres are at about 95% and the others around 60-70%
Ferrea titanium valve spring retainers to suit evo 1-7 - $80 -NEW
EVO 9 beehive valve springs - $30 -USED
E
Rear KYB shocks from a nimbus, less than a 1000km's - $50
Transfer case - no noticeable noises that I heard - $???
Gearbox- 17XXXXkm's 2nd gear synchro a bit funny when cold. $???
New middle driveshaft bearing and carrier, it is from a GVR4 but was told it fits the RVR - $40
Photos to come tomorrow, hopefully.
Contact via PM
Cheers,
Connor
