WTB: Brackets to mount evo front bar to GSR

4GTuner

Help Support 4GTuner:

S

SWTGSR

Well-Known Member
Joined
Jul 8, 2011
Messages
140
Location
Sydney
Hey,

I'm after the brackets to fit a evo 2 bar to my GSR.

Photos attached

Any help would be awesome

Thanks
 

Attachments

  • image.jpeg
    image.jpeg
    112.8 KB
  • image (1).jpeg
    image (1).jpeg
    85.3 KB
As the pictures show..they are actually part of the top radiator support ( spot welded onto it )
You cannot buy them separately, unless someone is wrecking one..and I doubt they would seperate IF you can find one!
Another option is to make them up yourself with a folder/ vice.
 
I MAY have a pair of these brackets at home, but as evo-gsr said, I think you're better off making your own up.
 
evo-gsr said:
As the pictures show..they are actually part of the top radiator support ( spot welded onto it )
You cannot buy them separately, unless someone is wrecking one..and I doubt they would seperate IF you can find one!
Another option is to make them up yourself with a folder/ vice.
Click to expand...
So should I be asking for the whole radiator support then?
 
ENGINR said:
I MAY have a pair of these brackets at home, but as evo-gsr said, I think you're better off making your own up.
Click to expand...
Not sure now if I should be asking for the full radiator support? But otherwise if you do have them around, i'll take them.

Will be doing a full respray and want to give them everything they'll need to get the job done right
 
Don't think there is any rad supports in Australia unless someone has one laying around or second hand one
 
BRUSHED said:
Don't think there is any rad supports in Australia unless someone has one laying around or second hand one
Click to expand...
So this maybe a bit of a reach then? LOL/FML
 
Yeah when I bought an E3 rad support I was told it was the last in the country, that's going back a year tho, not sure if they would bring any over unless you ordered one
 
Probably in the last 3 pages of my members ride. I had to put little tabs to extend the divertor so the fg bar could reach. A factory bar would be heaps better, you could put some butserts in it and bolt the bar to it.
 
 
So the plate should do the trick then?

Any chance u can upload a pic of what the stock rad support looks like in the car?

Is there anything else I should be aware of before getting the front bar changed over?

Cheers
 
I brought the Evo guards last Friday with the Evo brackets too.

The front bar I have lined up comes with Evo reo so all will be sweet there. I was just wanting to make sure it connected all good at the top mainly.

Cheers for the comments
 

Similar threads

M
Badges
Replies
0
Views
1K
Maso_
M
EVO-00X
EVO4 Front Bar, bonnet and rear bar/skirt for CE Lancer sedan
Replies
0
Views
950
EVO-00X
EVO-00X
C
Gearbox rebuilders local to Sydney, gearbox and clutch tech
Replies
0
Views
2K
Cal-evo2
C
T
HSG Front bumpers available?
Replies
0
Views
795
tyeler18
T
F
Jumbuck 4g93t swap HELP!
Replies
0
Views
3K
fado5
F

Latest posts

Back
Top