WTB complete Evo/gsr fuel tank

[ted]

Hi all,

Just seeing what everyone has in the way of an AWD Evo1-3/Gsr fuel tank complete with senders/fuel pump cradle and filler neck.
Pulled the tank out of my project car and its f#%ked.

Cheers.

 

[Ian91]

Isn't your car fwd? Or are you not talking about the proton?

Anyway if it's fwd can you use a coupe or fwd sedan tank?

 

[ted]

Yeah its for the proton Ian, i was going to fit and evo/gsr tank so i can just run the exhaust straight down the centre.....and maybe a tailshaft in the future

 

[BMGTZ]

I have several tanks over here in perth. let me know if you cant find a local tank. freight with likely rape you from here as it is dangerous goods after it has had fuel it it.

I found that out the hard way...........

 

[Lister]

I've got a gsr tank located in Canberra.

 

[ted]

Thanks for the reply guys, lister how much, how complete and how hard to get too? I have mates at summernats at the moment

 

[4piknup]

Will the kbs tank kit fix yours ted? It will fix rust and pinholes.
evooox has used the stuff I think. And a few others.

 

[ted]

Yeah it will jack i used it on my wagon tank it works well, no pin holes as such just very rusty and was thinking of a evo tank to have a straight exhaust instead of the snake that winds its way around the fwd tank.

 

[4piknup]

Yep. I get it. Upgrade as well.

 

[Lister]

PM sent

 

[1JUM2NV]

Just so u know ted. You don't need to neck if you still running fwd. I did the same thing on my old lancer, for the strait zorst. The evo neck is to go round the rear setup

 

[ted]

Yeah? So i can use the fwd filler neck?

 

[4piknup]

Im using my fwd filler in the ute with gsr tank.

Needed to cut off a front exhaust hanger for the tank to fit and double flare the fuel line to match up to the gsr flex.
Wiring plug mods too

 

[ted]

Awesome!! Thanks for the info lads

 

[1JUM2NV]

The AWD tank in my lancer was one of the best mods I'd done haha. No restrictions on the zorst.

 

[ted]

I know im a little excited

 

[4piknup]

The exhaust will go on as well, no problems. One of the floor braces needs a thread in a hole. I welded a flanged nut in the hole.
My ute has a exhaust from a gsr on it. Its the same to the back of the tank.