WTB: E2-3 Rear Fog Bulb Holder, Plug

[Tweetbix]

Hello all,

wondering if anyone has a Rear Foglamp bulb socket and plug from an E2-3 (also same as a proton wira, unsure of other models)

Cheers

 

[evo-gsr]

I have the switch.

 

[Cranked]

Pretty sure I used magna bulb socket and plug

 

[Cranked]

The number plate light one

 

[evo-gsr]

Really? Can you confirm....would be interested to see.

 

[Tweetbix]

This is the bulb holder/socket in question that I need, also need 2 plugs, as the holder/socket I have doesn't have a plug with it.

I'm also after, if anyone knows where to find any, another one of these bolts:

It slides into the fog light housing as an extra mounting point, my local nuts and bolts place has one similar, but the head is too big and the bolt too long.

 

[evo-gsr]

It would be easy enough to make a loom for those bulb holders using small female spade terminals?
As for the bolt it looks similar to the bolts that hold the afm to the airbox? I have some of those here if thats the case

 

[Tweetbix]

I must have been mistaken as to which foglight switch I was after sorry.

and here are the spades in the connector:

 

[evo-gsr]

Thats not an early Evo switch mate...thats from an Evo 4/5/6

Those terminals will work with my earlier suggestion too

 

[evo-gsr]

Also..good luck finding a switch like that... they are pretty rare and hard to come by. I looked for ages to get one for my Evo 5 and had no luck.

 

[Tweetbix]

Yea I was told the switch will be a bit hard to come by.
I was told the switch is similar on the early evo models and the early 90's galant, but apparently not.
Sorry about that.
Have updated the OP to reflect the misunderstanding.

 

[Cranked]

Plug yes definitely. Bulb holder very possible

 

[!Jonzap!]

That bolt and nut combo looks similar to the ones that hold the AFM to the airbox, pull your filter element out and you'll see what I'm talking about, check if its the same.

That's assuming you still have a stock airbox

 

[evo-gsr]

As for the bolt it looks similar to the bolts that hold the afm to the airbox? I have some of those here if thats the case

 

[Tweetbix]

Very interested if they are the same, my local nut and bolt place has one similar, but the head is too big and thread too long.
Don't have the oem airbox, car came with a death shroom when I got it.

Sent from my D6503 using Tapatalk

 

[Cranked]

I agree with afm bolt too

 

[!Jonzap!]

As for the bolt it looks similar to the bolts that hold the afm to the airbox? I have some of those here if thats the case

haha, missed that

 

[Tweetbix]

So been and had a look at the plug on a magna, you are are indeed correct that the plug is the same, the bulb socket is similar but not the same, nor will it fit.

That's one down, now to find a socket.

 

[Cranked]

Hey 50% ain't bad

 

[Tweetbix]

Still very good advice, cheers for that.
plenty of wrecked magna's down here.