WTB: Evo 3 Front Bar Mesh

[dkGSR]

Hey guys I'm chasing the mesh inserts for the Evo 3 front bar or similar mesh.
PM me if you do or know where I can get some from.

 

[ENGINR]

Goodluck mate! I spent ages trying to track down original mesh - it's very rare and very very expensive!!

 

[dkGSR]

yeh thought I'd give it a try first and ask but most likely going to have to buy something from autobarn.

 

[ENGINR]

yeh thought I'd give it a try first and ask but most likely going to have to buy something from autobarn.

You could try Bunnings for mesh, or even places that do security screen doors. Sometimes they have decent mesh which is a bit more robust and looks a bit better than the autobarn stuff.

 

[EVO85]

You should be able to purchase welded mesh by the metre from hardware stores as mentioned above. From memory, you'll have the choice between 5.5mm or 10mm square mesh @ 900mm wide...

 

[dkGSR]

cheers guys
oh and EVO85 dont worry i havent forgotten about the apexi stand in justing waiting to get a chance to grab the safc

 

[Dean]

i've got original mesh
might be willing to let it go.
lemme know what you want to pay for it.

 

[ENGINR]

$20!!

 

[evopwr]

its just mesh lol! go get autobarn mesh and stop whinging

 

[Dean]

http://www.phat7s.com/Stop Whining.jpeg

 

[dkGSR]

lol anyways Dean let me know how much roughly you're chasing for it and the condition.
hey i dont mind either way just want something to look as close as possible to the evo mesh.

 

[Richard]

Hey Buddy I found a place that sells mesh by the square metre, as in a metre wide X however much you want, @ ~ $70 per metre, I just havent got around to getting some for my self yet as they had stopped cutting for the day when I got there (after 2PM). You can get a few different sizes in terms of wire thickness and square sizing, it is stainless steel welded mesh or you can get woven if you want also.

Locker Group, 2 Cojo Place Dandenong South VIC 3175. PH: 03 8791 1000

 

[dkGSR]

Thanks RIchard I'll keep this one in mind as I'm gettin some work done in Dandy anyways.