WTB evo 5-9 tdo5 10.5cm rear housing or blown turbo.

[caged]

Im chasing an evo 5-9 tdo5 10.5cm rear housing or complete blown turbo. cheers

 

[evo-gsr]

Have you tried EvoOz .?
Might have more luck on there due to the number of later model evos on that site...

 

[JayRome]

whats the part number on the rim of the housing? i have a few lying around but they are mixed between 9.8's and 10.5's...

 

[caged]

Have you tried EvoOz .?
Might have more luck on there due to the number of later model evos on that site...

Yeah mate I'm trying on there too, I know a few fellas on here have a bit of late stuff laying around.

whats the part number on the rim of the housing? i have a few lying around but they are mixed between 9.8's and 10.5's...

It shouldn't matter what part number as long as its got 10.5 cast onto it. Cheers

 

[JayRome]

i'll check sometime next week.. should have a dead TME turbo lying around somewhere... its in storage..

 

[caged]

Cheers mate not in a hurry anyway.

 

[Bryce]

I have a dead Garrett 3071r, with a bent shaft and destoryed comp wheel, might need new bearings and seals too but not sure. Lemme know if your keen

 

[caged]

Na mate I'm just after a tdo5 housing to upgrade my 9cm housing on my compound turbo setup.

 

[caged]

i'll check sometime next week.. should have a dead TME turbo lying around somewhere... its in storage..

Any luck mate?

 

[JayRome]

sorry it took me so long, found one but has no markings on it in regards to 9.8 or 10.5. they are usually stamped inside one of the runners, but this one doesn't.

 

[caged]

Can you take a pic of the numbers cast into the turbine housing, I think you can work it out from them too. Or if its complete or you know what compressor it was paired to it should say on that too. http://translate.google.co.uk/translate?hl=en&sl=ja&u=http://homepage2.nifty.com/lancer/turbo.htm&sa=X&oi=translate&resnum=3&ct=result&prev=/search%3Fq%3DTD05HR%2B16G6%2B9.8T%26start%3D10%26hl%3Den%26sa%3DN

 

[JayRome]

okay checked it out, one broken bolt on the dump pipe side, and the threads on the exhaust manifold side have been drilled (bolt and nut upgrade i guess)

 

[caged]

Dam its an Evo 4 9cm. No other ones laying around lol.