Wtb fwd gearbox. Melb

4GTuner

Help Support 4GTuner:

Gianni

Well-Known Member
Joined
Oct 14, 2008
Messages
2,400
Location
Melbourne
Hey I'm looking for a fwd gearbox out of a cb or galant. Hydrolic clutch. With fork

It's to go onto an na 2L. I've attach 4g15, and cb 1.6 boxes to it. And galant boxes fit. So if anyone has any in running condition please let me know :)

Currently my box runs fine. But when I step on the clutch it's normal feeling until about halfway down. Then u have to push it really hard and it'll go down all the way. Slot it in gear but as soon as you let it up the pressure pops the pedal up to the first point so can't find friction point and car just jumps.

This has happened since my clutch dropped a spring. I changed the clutch but now it's doing this.
 
I bought a smashed jumbuck for a door and a few other bits, the gearbox has around 136000k on it. But I haven't driven it.
It is the cc style that roll stops bolt too as opposed to the vr4 and sonata that has roll stops on the block. I think they are same as the gti box but slightly different ratios. Is bolted to 4g15. Has hydraulic clutch. $200 plus $100 freight (to freight depot in Melbs)
 
I prefer the smaller boxes. I prefer the ration first gear gets to 60km. Second gets to about 110 or something.

I'm sure it'll fit still because they all mount in the same spot and te cb doesn't have te stop mounts on the box anyways
I'll pm
 
Problem solved thanks to khubner. The 3mm washer fixed the problem. No need for a new box :)

And thanks everyone for your help and offers with your items :)
 
Back
Top