Looks great, it does remind me of your car Dan (GSRSOL)
Welcome to 4GTuner
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
#21
Posted 18 January 2009 - 09:43 PM
bazeng
-
- Active Members
-
- 9,899 posts
Gday maaaate
- LocationMelbourne
AMG | http://www.4gtuner.c...mmc-galant-amg/
GVR4 | http://www.4gtuner.c...shi-galant-vr4/
Springy Motors | Autronic | Motec
Back to top
#22
Posted 19 January 2009 - 12:02 AM
GSRSOL
-
- Administrators
-
- 8,319 posts
Bird Nerd
- LocationMelbourne
Looks great, it does remind me of your car Dan (GSRSOL)
not for much longer
Dan | Melbourne | 1994 CD5A / CE9A / E39A bastard child
special thanks to - TRIKFAB | Tropic Motors | Springy Motors
special thanks to - TRIKFAB | Tropic Motors | Springy Motors
#23
Posted 19 January 2009 - 12:51 AM
steve
-
- Active Members
-
- 669 posts
fevolution!
- LocationSydney
#24
Posted 20 November 2011 - 09:05 AM
Craig_CD9A
-
- Active Members
-
- 127 posts
Member
- LocationAdelaide Hills
So after spinning some bearings in the old motor the old girl is running again with a much fresher Evo 3 motor. Also installed a Toda Racing cromoly flywheel and Centerforce dual friction clutch.
Other updates are BC BR coilovers and CE9A front swaybar and control arms.
Other updates are BC BR coilovers and CE9A front swaybar and control arms.
#25
Posted 20 November 2011 - 02:11 PM
3zercrowd
-
- Administrators
-
- 8,388,607 posts
Donating Member
- LocationTownsville
Pics? 
QUOTE OF THE YEAR>>> BTW... does anyone else have a sore ass??
Dane/Lancer GSR
[email protected]!!!
STILL Needs more Kilowatts!
Members rides> http://4gtuner.com/s...read.php?t=1910
#26
Posted 26 February 2018 - 08:39 AM
Craig_CD9A
-
- Active Members
-
- 127 posts
Member
- LocationAdelaide Hills
Update!
I've now had the car off the road now for a couple of years, it needs a fair bit of work and being grown up with a mortgage makes things hard!
I've just ordered from Proton a new roof shell, the roof ribs and all the plastic channels and window rubbers. So that will need to happen, and it's due for a whole respray $$$(I'll keep it red).
I've bought an Evo 3 mechanical diff centre and the driveshafts, they'll go in with my ralliart diff bushes and the tailshaft with new unis and centre bearing.
The steering rack needs a rebuild, I've got some inner tie rods and some super now tie rod ends to go on, I'm not sure if I'd be better off with standard tie rod ends.
I'm really trying to convince myself to pull out the motor for a freshen up too, it could do with a new water pump, timing belt, and all new gaskets throughout. I have these parts laying around ready to go, apart from a gasket set. If I did this, I may as well rebuild with forged internals. I also have a Mitsi 4G64 crank from the USA hidden away, but that can wait I think!
I've just bought an ECMLink v3, so once my ECU is chipped that goes in too.
With the Tailem Bend racetrack opening in a couple of months time, this has given me some inspiration to get things rolling!
I've now had the car off the road now for a couple of years, it needs a fair bit of work and being grown up with a mortgage makes things hard!
I've just ordered from Proton a new roof shell, the roof ribs and all the plastic channels and window rubbers. So that will need to happen, and it's due for a whole respray $$$(I'll keep it red).
I've bought an Evo 3 mechanical diff centre and the driveshafts, they'll go in with my ralliart diff bushes and the tailshaft with new unis and centre bearing.
The steering rack needs a rebuild, I've got some inner tie rods and some super now tie rod ends to go on, I'm not sure if I'd be better off with standard tie rod ends.
I'm really trying to convince myself to pull out the motor for a freshen up too, it could do with a new water pump, timing belt, and all new gaskets throughout. I have these parts laying around ready to go, apart from a gasket set. If I did this, I may as well rebuild with forged internals. I also have a Mitsi 4G64 crank from the USA hidden away, but that can wait I think!
I've just bought an ECMLink v3, so once my ECU is chipped that goes in too.
With the Tailem Bend racetrack opening in a couple of months time, this has given me some inspiration to get things rolling!
- bazeng likes this
#27
Posted 27 February 2018 - 05:21 AM
ENGINR
-
- Active Members
-
- 5,061 posts
Wannabe Racer
- LocationMelbourne
Holy thread resurrection Batman!! Good to see this is still ongoing. I'm excited about the new track too, even though it's 8hrs away in another state. Looking forward to seeing updated pics as you progress.
"I got an idea, an idea so smart my head would explode if I even began to know what I was talking about." - Peter Griffin
#28
Posted 27 February 2018 - 08:43 PM
EvoOne
-
- Active Members
-
- 559 posts
Advanced Member
- LocationSydney
#29
Posted 28 February 2018 - 04:22 AM
bazeng
-
- Active Members
-
- 9,899 posts
Gday maaaate
- LocationMelbourne
8 hrs to attend a new drag racing track Shayne? I'm keen! Let's do it..
AMG | http://www.4gtuner.c...mmc-galant-amg/
GVR4 | http://www.4gtuner.c...shi-galant-vr4/
Springy Motors | Autronic | Motec
#30
Posted 28 February 2018 - 10:22 PM
ENGINR
-
- Active Members
-
- 5,061 posts
Wannabe Racer
- LocationMelbourne
8 hrs to attend a new drag racing track Shayne? I'm keen! Let's do it..
Roadtrip!! When your GTO is ready to hit the circuit we'll have to organise a few roadtrips to Wakefield in NSW and Taliem Bend/Mallalla in SA.
"I got an idea, an idea so smart my head would explode if I even began to know what I was talking about." - Peter Griffin
#31
Posted 14 March 2018 - 01:41 PM
GSR94T
-
- Active Members
-
- 753 posts
Advanced Member
- LocationSydney NSW
So cool you still have it. Gonna take some progress shots of the roof change, respray etc.?
Good youre keeping it the original colour too
- bazeng likes this
Previous cars:
Evo 5 GSR
Evo 8 MR
1994 Lancer GSR (2L , Evo 3 replica)
#32
Posted 22 March 2018 - 09:41 AM
Craig_CD9A
-
- Active Members
-
- 127 posts
Member
- LocationAdelaide Hills
I will take progress pics as there is progress. Just been set back a bit by a bit of bill to replace some parts on my daily driver.
At the moment the Evo is on four axle stands, ready to start pulling the diff etc out.
There is play in one of the diff member bushes, to the extent that I can grab the whole diff assembly and thump it right up against the underside of the car. It moves about 3 inches.
At the moment the Evo is on four axle stands, ready to start pulling the diff etc out.
There is play in one of the diff member bushes, to the extent that I can grab the whole diff assembly and thump it right up against the underside of the car. It moves about 3 inches.
#33
Posted 09 April 2018 - 03:41 AM
Andy007
-
- Members
-
- 70 posts
Advanced Member
- LocationToowoomba
2 user(s) are reading this topic
0 members, 2 guests, 0 anonymous users
