CD9a / CE9a front LSD - help me identify it!

4GTuner

Help Support 4GTuner:

E

evopwr

[DIY]
Joined
Feb 23, 2006
Messages
3,258
Location
Melbourne
Hey guys,

Anyone got a picture of the front LSD for a CD9a/CE9a ?
Just want to see if there is roller bearing on both sides of it.

cheers
alex
 
hope this helps, yes they have roller bearings each side. these need to have there preloads set when rebuilding box or changing bearings. the left is the front diff right is the rear.
 

Attachments

  • ats%20side.jpg
    ats%20side.jpg
    19.3 KB
yeh that helps heaps mr borg :) 99% of what im after!

do you know if there is a shaft that goes into the 'flange-side' of the front LSD? or is the assembly all '1 piece' ?

cheers
alex
 
not quiet sure i get you. not talking about drive shalfts. you talking diff internals? and what type of lsd?
 
your not talking about the center diff are you? that has a shaft that comes out of the top hat for the inner spline viscous coupling to attach to?
 
ok Mr borg, here are the pics of the LSD in question:

passanger's side shaft insert. nothing interesting:
09052009967.jpg


driver's side shaft insert. Note lack of bearing shaft???
09052009968.jpg


Any ideas? I think there is another insert that goes into the shaft hole (seems like there are different/bigger diameter splines) where the bearing sits on.

alex
 
If you don't already have them you need 8 new pinion gear bolts aswell. Non lsd pinion bolts cannot be used. They were about $120 last time i checked.
 

Similar threads

C
Gearbox rebuilders local to Sydney, gearbox and clutch tech
Replies
2
Views
2K
Liberoz
Liberoz
ULS33-RVR-GO
5 stud conversion "wheel bearings" (GSR + 2x sets FTO front hubs)
Replies
3
Views
2K
Liberoz
Liberoz
T
HSG Front bumpers available?
Replies
0
Views
901
tyeler18
T
F
Jumbuck 4g93t swap HELP!
Replies
0
Views
3K
fado5
F
I
Side skirt and rear pods
Replies
8
Views
3K
Ian91
I

Latest posts

Back
Top