Cheap cheap!
Buy some spares!
VR4 Engine mounts - powder coated light silver. Power steering support removed for weight reduction. You don't need this part as DSM's in the US do not have these bits. Never used! All bushes pressed out. Good for polyurathane inserts (I have a set of these too).
$100.00 for the set.
VR4 rocker cover - compatible with EVO1-2-3.
Powder coated silver with -6 welded fittings on the breathers. $100.00 Sold pending payment
Powder coated black HYUNDAI cover with -6 fittings x2 welded. - black $100.00
Sony 4"speakers $$free
Various heat shields - na and turbo $1.00 each SOLD & Binned
Simota 3"air filter used - $5.00 Binned
Stock Air box - $5.00 Binned
Box of 4ws parts - $10.00 (2 pumps included) Binned
Kaaz power train oil - $50.00
Stock turbo outlet and custom turbo outlet (tdo5) $5.00 / $10.00 Sold!
Modified oil filter housing (6bolt) -10 fittings welded and ported relief valve $50.00 Sold!
XF throttle bodies - $20.00 each no tpsbolts onto stock intake manifold with minor porting - TPS adaptor required to be made
Brake lines $5.00 set Binned
Harmonic Balancer $5.00 Binned
Fuel filter to fuel rail line $5.00 each
modifed fitting $5.00
Stock springs $10.00
Turbo (tdo5) oil supply line $10.00 Given away
Apexi radiator cap - $30.00 (to suit R32 i believe)
Alternator relocation kit (custom, air con location) powdercoated black - $50.00 Sold!
ARP head studs - used - nothing wrong with them (7bolt) - $50.00 set SOLD!
Custom Front Mount intercooler - 780x280x75 tube and fin to suit VR4 - comes with modified stock radiator to allow for short pipes. Requires some steel work to be trimmed. $150.00 (PIC of radiator and intercooler in attachment. Will take more soon)
Mixed VR4 galant Struts / springs - GAB and Stock. One set each. $50.00 for the lot Fronts available only now
Various SUMPS / Pullies / Brackets to suit 4g63 / 4g64 $offers
Autogauge Monster Tacho with shift light - $50.00
Sold pending payment
Various cables - 16mm2 to 32mm2 - 2metres to 10 metre lengths - RED AND BLUE $cheap - pm
Various transfer cases and rear diffs (3bolt and evo)
$150 alloy transfer cases Sold pending payment/ $300 steel transfercases / $500 for evo diffs / $250.00 for vr4 diffs (open)
Nardi steering wheel (used) with horn. no tears. decent condition - $40.00 SOLD pending payment
19 Row oil cooler - $80.00 - no dents - fittings not included SOLD
Bonnet pins - $25.00 - never used
Black powdercoated gearbox mounts (on chassis and box) AWD gearbox. VR4 Galant, not sure if its compatible with Lancers. - $50.00
Modproject 3" pod filter new - $10.00
90 degree 3" stainless steel bend - $20.00
Aus spec oil filter housing with water jacket removed and custom thread to fit onto relocation kit - $100.00 Allows about 4cm's of additional clearance over a standard oil filter housing (jspec or aspec). Pressure relieve has been ported also. About 70psi MAX from memory without balance shafts.
You just need to purchase the other end of the relcation kit which is about 50 bux from memory. You will then utilise a Ford big ass filter - K9 I think.
Gates timing belt to suit 2.0L 4g63 DOHC - $75.00 under 5000km's old. SOLD!
Octane booster - $10.00 per bottle - 2 left. Was used for the VR4 but since it hasn't been on the road, I won't be needing it. RRP is about $25.00 each. Good for dyno days / drag days (to be safe)
http://i449.photobuc...64800x600-1.jpg
http://i449.photobuc...64800x600-1.jpg
Custom Galant air box. - $30.00
Bolts into existing holes in VR4 chassis. Requires battery to be relocated. Designed for 4" intake pipe. 3 screws remove the cover. Just needs a nice polish
SOLD
http://i449.photobuc...65800x600-1.jpg
http://i449.photobuc...66800x600-1.jpg
http://i449.photobuc...67800x600-1.jpg
Innovate wide band o2 sensor + gauge - LC-1 & blue gauge. $350.00
Used for about 4 hours. Works with AUTRONIC or can work independantly. Connects to laptop for logging also.
http://i449.photobuc...68800x600-1.jpg
http://i449.photobuc...69800x600-1.jpg
Wiseco Piston kit - to suit 2.0L with 100mm crank (2.3L stroker) - $600.00
Competition coated ($200.00 RRP) - 1 piston replaced due to crack cylinder wall - other 3 pistons fine to reuse. 40 thou over. All New piston rings / rails supplied. In order to use with a 7bolt, the pins are 21mm, for VR4's , you will require a machine shop to rebush evo rod little ends to 21mm from the stock 22mm. Not expensive $100ish from memory. Also a benifit of a lighter piston =). Used for only about 5000kms. No cracks or detonation. Bearings available for inspection of engine condition when running (like new).
http://i449.photobuc...0571800x600.jpg
http://i449.photobuc...0575800x600.jpg
http://i449.photobuc...0576800x600.jpg
2 wire double insulate cable - 5mm thick copper core. $2.00 per metre
http://i449.photobuc...84800x600-1.jpg
http://i449.photobuc...85800x600-1.jpg
Modified stock VR4 Radiator to suit custom intercooler.
http://i449.photobuc...ng/DSC00588.jpg
http://i449.photobuc...ng/DSC00587.jpg
http://i449.photobuc...ng/DSC00586.jpg
Plastic duct - approx 42mm - 10 metre lengths (can buy in length or whole roll) $25.00 roll or $3.00 p/m. Great for brake ducts.
http://i449.photobuc...ng/DSC00591.jpg
http://i449.photobuc...ng/DSC00592.jpg
3x Gauge pod - fibreglass - $15.00
Needs to be modified to suit application.
http://i449.photobuc...ng/DSC00589.jpg
http://i449.photobuc...ng/DSC00589.jpg
Attached Thumbnails
Edited by bazeng, 06 July 2009 - 03:57 AM.
updated
Back to top
