I already have ralliart front and rear roll stoppers but what do you think of these? i wonder if they are complete or just the inserts??
http://perfectrun.jp...id=102&mcate_id
Welcome to 4GTuner
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
#1
Posted 08 April 2010 - 09:05 AM
ONPSI
-
- Active Members
-
- 1,218 posts
10 second monster
- LocationGold Coast
FORBIDDEN PERFORMANCE
0433 245 136
Rides:
'95 Genuine Evo III - 310kw - 11.2 @ 129mph SOLD
'95 Lancer GSR - 340kw - 10.8 @ 129mph SOLD
0433 245 136
Rides:
'95 Genuine Evo III - 310kw - 11.2 @ 129mph SOLD
'95 Lancer GSR - 340kw - 10.8 @ 129mph SOLD
Back to top
#2
Posted 08 April 2010 - 09:40 AM
DOUGMO
-
- Active Members
-
- 8,885 posts
yoni lover
- LocationMelbourne
i dont think the actual ones are pictured. ralliart roll stoppers do a bloody good job.
GENUINE CE9A evo2 gsr track car
all fabrication BJP AUTOMOTIVE
winton 1:27.4 /// sandown 1:21.5 /// phillip island 1:49.2 /// haunted hills 59.1 /// eastern creek 1:35.4 /// winton short 1:01.4
#3
Posted 08 April 2010 - 09:49 AM
evopwr
-
- Active Members
-
- 3,283 posts
[DIY]
- LocationMelbourne
#4
Posted 09 April 2010 - 12:07 AM
Missile
-
- Active Members
-
- 1,694 posts
Member No. 00004
- LocationPerth, WA
When you think about it the mounts have been doing 15+ years of work... the metal component may actually be getting a little tired. Much cheaper than buying new Mitsi mounts. On the other hand I have never seen any of the mounts in my mitsi's suffer from cracking - hence the insert is sacrificial.
$300 isnt too bad for a set of complete mounts - RA inserts will be a shed load more than that.
$300 isnt too bad for a set of complete mounts - RA inserts will be a shed load more than that.
Edited by Missile, 09 April 2010 - 12:09 AM.
Current projects: Mitsubishi ca5a/ce9a awd hybrid
Daily Rip: CE9A Evo II
www.cardomain.com/id/m1ssile
Built not Bought
#5
Posted 09 April 2010 - 12:46 PM
cwolf
-
- Members
-
- 31 posts
Advanced Member
- LocationBunbury WA
i just bought a set of ralliart mounts paid $350 but they where only the inserts.
looking at the cusco ones they are a solid design rather than the sectioned design of the ralliarts.
so NVH levels would be much higher , i would reckon that they'd be better for performance but might prove to be a bit to much for the street.
depends on what your going to use the car for.
looking at the cusco ones they are a solid design rather than the sectioned design of the ralliarts.
so NVH levels would be much higher , i would reckon that they'd be better for performance but might prove to be a bit to much for the street.
depends on what your going to use the car for.
#6
Posted 09 April 2010 - 01:37 PM
p3akin
-
- Active Members
-
- 2,906 posts
Advanced Member
- LocationMelbourne
these are not too bad. might look into it.
when are you getting em?
when are you getting em?
Current: 04 E46 M3 S/C
89 E30 325is
RIP: 94 J-Spec Lancer GSR - 149.1 kw
Winton Raceway: 1:41.8900
89 E30 325is
RIP: 94 J-Spec Lancer GSR - 149.1 kw
Winton Raceway: 1:41.8900
#7
Posted 09 April 2010 - 08:31 PM
ONPSI
-
- Active Members
-
- 1,218 posts
10 second monster
- LocationGold Coast
i just saw them on perfectrun and thought i'd ask people's thoughts however since i have Ralliart front and rear i need to do something about the other side mounts...i still have forward back movement 
FORBIDDEN PERFORMANCE
0433 245 136
Rides:
'95 Genuine Evo III - 310kw - 11.2 @ 129mph SOLD
'95 Lancer GSR - 340kw - 10.8 @ 129mph SOLD
0433 245 136
Rides:
'95 Genuine Evo III - 310kw - 11.2 @ 129mph SOLD
'95 Lancer GSR - 340kw - 10.8 @ 129mph SOLD
#8
Posted 10 April 2010 - 01:03 AM
ENGINR
-
- Active Members
-
- 5,061 posts
Wannabe Racer
- LocationMelbourne
IMO waste of money and serious wank factor.
I agree 100% Alex.
Ralliart inserts FTW. Fits straight into the factory mount and they do a bloody good job.
‎"I got an idea, an idea so smart my head would explode if I even began to know what I was talking about." - Peter Griffin
#9
Posted 10 April 2010 - 01:39 AM
philsth
-
- Active Members
-
- 122 posts
Advanced Member
- LocationBrisbane
For a bit of info i went to my local Mitsubishi dealer and ordered the 2 roll stop mounts and they cost 60 and 40 odd dollars, thing is they had them in stock in Sydney and I got from a dealer cheaper than anywhere else I've seen.
As for the other 2 mounts I don't know if there still available but here's the Part numbers:
RA871602K1 Ralliart Engine & Transmission Insulator Hardened rubber mount. 2 req'd.
RA581297K1 Ralliart Engine Roll Insulator, Forward Hardened rubber mount.
RA309269K2 Ralliart Engine Roll Insulator, Rearward Hardened rubber mount
I got these numbers off this site somewhere.
Cheers
As for the other 2 mounts I don't know if there still available but here's the Part numbers:
RA871602K1 Ralliart Engine & Transmission Insulator Hardened rubber mount. 2 req'd.
RA581297K1 Ralliart Engine Roll Insulator, Forward Hardened rubber mount.
RA309269K2 Ralliart Engine Roll Insulator, Rearward Hardened rubber mount
I got these numbers off this site somewhere.
Cheers
- CLuTZ likes this
GSR gone. Now driving 14 lancer ralliart but miss my GSR.
#10
Posted 10 April 2010 - 03:09 AM
nk
-
- Active Members
-
- 438 posts
Advanced Member
- LocationMelbourne
the cusco ones are a complete replacement set.. you can buy them on ebay for about $450 from nahux i think (local).
sikwpn has them in his project car and they're solid. much better than messing around with ra inserts imo.
sikwpn has them in his project car and they're solid. much better than messing around with ra inserts imo.
#11
Posted 10 April 2010 - 04:20 AM
Dean
-
-
Moderators -
- 6,558 posts
Member
- LocationMelbourne VIC
FYI the complete mounts + brackets from Mitsubishi cost more than the above. I was going to get a set myself and I think it was around the $500 mark for just 2 of them (cant remember which 2)
Complete set for $450 isnt too bad. I agree with nk. Saves alot of mucking around.
Complete set for $450 isnt too bad. I agree with nk. Saves alot of mucking around.
4G93T No More
#12
Posted 11 April 2010 - 01:01 PM
Liberoz
-
- Active Members
-
- 2,831 posts
Advanced Member
- LocationSydney
FYI the complete mounts + brackets from Mitsubishi cost more than the above. I was going to get a set myself and I think it was around the $500 mark for just 2 of them (cant remember which 2)
Complete set for $450 isnt too bad. I agree with nk. Saves alot of mucking around.
seems like alot of weird prices being spoken of doesnt compare to
here > http://meek.com.au/i...viewCat&catId=9
John
CE9W RIBEROGT RANSAEBO II
RRF | 0Z Racing | RALLI/// ///ART | Sparco | MEEK | Elf | Fujitsubo | Marle Pistons | HKS-RS Intake | Cusco | Apexi | PUMA | Dia Queen | GIII's | Hibrid III | MMC | GReedy TRUST | Camtech | RECARO| RSEII Spec | RALLIART Options inside | Walbro
CE9W RIBEROGT RANSAEBO II
RRF | 0Z Racing | RALLI/// ///ART | Sparco | MEEK | Elf | Fujitsubo | Marle Pistons | HKS-RS Intake | Cusco | Apexi | PUMA | Dia Queen | GIII's | Hibrid III | MMC | GReedy TRUST | Camtech | RECARO| RSEII Spec | RALLIART Options inside | Walbro
#13
Posted 11 April 2010 - 11:35 PM
Dean
-
-
Moderators -
- 6,558 posts
Member
- LocationMelbourne VIC
Thats because those prices from Meek are for simply the inserts.seems like alot of weird prices being spoken of doesnt compare to
here > http://meek.com.au/i...viewCat&catId=9
My price is direct from Mitsubishi for the complete set of inserts + brackets, bolt off/bolt on job.
4G93T No More
#14
Posted 08 March 2015 - 02:38 AM
Harley
-
- Members
-
- 29 posts
Member
- LocationAdelaide, SA
Sorry for the epic thread revival, but I'm looking at finalising parts to drop the 4g63t into my CC GSR, and the timing belt side 2-piece engine mount is one of the last things I need - do the Cusco ones come 2-piece (block & chassis), or is it just the chassis mount? Don't want to pay $500 for a two piece mount like I've been quoted...
Cheers!
#15
Posted 08 March 2015 - 02:45 AM
DOUGMO
-
- Active Members
-
- 8,885 posts
yoni lover
- LocationMelbourne
you will need the block bracket
GENUINE CE9A evo2 gsr track car
all fabrication BJP AUTOMOTIVE
winton 1:27.4 /// sandown 1:21.5 /// phillip island 1:49.2 /// haunted hills 59.1 /// eastern creek 1:35.4 /// winton short 1:01.4
#16
Posted 08 March 2015 - 09:26 AM
evo-gsr
-
- Active Members
-
- 10,379 posts
Advanced Member
- LocationBuddhist Temple NSW
Qouted by who? Lol @ $500
[qoute name="BMGTZ" post="331212" timestamp="1467451744"]I don't know anything ...
Trust in the master of taxis.... He will set you straight[/quote]
Trust in the master of taxis.... He will set you straight[/quote]
#17
Posted 08 March 2015 - 09:34 AM
EVL20T
-
- Donating Members
-
- 5,197 posts
AWD 4G63T POWAH!
- LocationNewcastle
Those mounts sell for around $60-80 each, problem is finding them
Which is a reason some sellers up the prices to $500 hahaha, unfortunately people fall for it
------------ 4GTUNER STICKERS - CLICK HERE ------------
------------------------- 4G63T AWD COUPE -------------------------
----------------------- WWW.EVOCOUPE.NET -----------------------
------------------------- 4G63T AWD COUPE -------------------------
----------------------- WWW.EVOCOUPE.NET -----------------------
#18
Posted 08 March 2015 - 10:30 AM
evo-gsr
-
- Active Members
-
- 10,379 posts
Advanced Member
- LocationBuddhist Temple NSW
Some dreamers, not sellers.
[qoute name="BMGTZ" post="331212" timestamp="1467451744"]I don't know anything ...
Trust in the master of taxis.... He will set you straight[/quote]
Trust in the master of taxis.... He will set you straight[/quote]
#19
Posted 08 March 2015 - 10:31 AM
evo-gsr
-
- Active Members
-
- 10,379 posts
Advanced Member
- LocationBuddhist Temple NSW
Good luck finding them new for 60-80$ but. Maybe used...but fuck buying used.
[qoute name="BMGTZ" post="331212" timestamp="1467451744"]I don't know anything ...
Trust in the master of taxis.... He will set you straight[/quote]
Trust in the master of taxis.... He will set you straight[/quote]
#20
Posted 08 March 2015 - 11:06 AM
EVL20T
-
- Donating Members
-
- 5,197 posts
AWD 4G63T POWAH!
- LocationNewcastle
Yeh i meant used, easy to find the chassis mount, GSR500 has 1 for $60 and Rickii was around $80
The 1 that bolts to the block is the hardest to find, everyone grabs them right away for their 6 bolt conversion
Also no one is gonna strip an engine to sell that mount, unless the engine is busted/blown
------------ 4GTUNER STICKERS - CLICK HERE ------------
------------------------- 4G63T AWD COUPE -------------------------
----------------------- WWW.EVOCOUPE.NET -----------------------
------------------------- 4G63T AWD COUPE -------------------------
----------------------- WWW.EVOCOUPE.NET -----------------------
3 user(s) are reading this topic
0 members, 3 guests, 0 anonymous users
